Do you have a question about the 215FS and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Falcon 215FS
Page 1
Instruction Manual OUTDOOR SMART TV (MODEL : 215FS) ❇Precaution Instructions and product specifications in this manual are based on the latest specification of date of preparation. Instructions could be changed by addition, improvement, and alteration. All rights of product and manual belong to manufacturer.
Page 3
Product Specifications Hardware Dual-core ARM Cortex A9 processor with NEON Platform Quad-core high-performance GPU 1GB DDR3 Memory Flash 4/16/32/64 GB Emmc Srceen Diagonal 546*865(21.5“) Active Area 476.64(H)*268.11(v) Pixel 1920(*3)*1080 Pixel Pitch 248.25(Per one Triad)*248.25 Pixel Arrangement R. G. B Vertical Stripe Display White Luminance 250 cd/m2(Typ)
Page 4
Safety Warning and Precautions To prevent fire, electric shock and the other negligent accident, Do not store a product in water or humid atmospheres. Do not open a cover of product and if you need to replace components by breakdown or other services is required, Contact agent where you purchase the product and get technical assistance and advice.
Remote Control This remote control could use not only this product but Television. Refer to Remote Control setup from instruction to control TV. 1. Mute Turn off a TV volume 2. SAT Switch TV’s external input 3. Main Power Turn ON/OFF from main body 4.
Please make sure the all contents are included, If there are any missing or damaged item. Contact to your manufacturer or distributor. Basic Composition Item Quantity OUTDOOR SMART TV (model : 215FS) Remote Control AAA Battery DC Power Adapter Instruction Manual Option Charged Battery...
Product Basic Composition Instruction ① ② ③ ① AUDIO E-JACK Potable earphone connect terminal AUDIO(L, R) Audio Output Terminal(L, R) VIDEO Video Output Terminal DVB-S2 Satellite Signal Input Terminal ATSC Terrestrial Signal Input Terminal HDTV External Monitor Connection Terminal terminal for external USB device (HDD •...
Page 9
④ POWER MENU HOME +, - BACK ④ POWER Turn on/off power + , - Increase or decrease channel or volume MENU Open the menu BACK Return to former step HOME Return to Home Connectiong Diagram HDMI Satellite Antenna Recharge Adapter Terrestrial Antenna (Input Terminal) ETHERNET...
Manual Satellite Broadcasting Setup, Watching [Picture 1] Click a menu located in right bottom [Picture 2] Click “Kodi”. ( ) on the main screen. [Picture 3] Select “Channel search” from [Picture 4] Select “DCVB-S/S2, ATSC" or “Kodi TV” menu. "Source Type" which is fit with region. and adjust “Satellite”...
Page 11
[Picture 7] Click SAT/Air Tv from main screen. [Picture 8] After Click SAT/Air Tv from main screen, then click number 16 button of remote control and click “Channel manager” [Picture 9] Click “Group management“ [Picture 10] Click which you connect satellite from “Available Groups”...
Page 12
[Picture 14] Satellite connect screen 1. [Picture 13] Click “TV”, Channel list will show up. Select what you want to watch. [Picture 15] Satellite connect screen 2. [Picture 16] Satellite connect screen 3. - 7 -...
Recording Satellite Broadcasting (.TS extension) - Recorded file through Satellite Broadcasting save as "TS" at external storage(USB, External HDD) / _video_ / - “TS” means Transport Stream which is Digital Format Method used in HDTV Broadcasting and other. It can transmit video, audio, data at one stream. - If the removable disk is in FAT format during recording, it can not record more than 4G.
Page 14
[Picture 2] Click potable storage device(USB, [Picture 1] Click "Media Center" from main HDD). screen. [Picture 3] Click a folder where recorded video [Picture 4] Click a video(TS) which you want. saved. [Picture 5] Recorded video screen. - 9 -...
Terrestrial TV Setup and Watching [Picture 1] Click “SAT/Air TV” on main menu. [Picture 2] Click “Channel search”. [Picture 4] After completed all channel, Click [Picture 3] When above screen is show up, “Yes” from a screen like above. adjust "ATSC" from "Tuner Selection".Then Click “Scan all”.
Page 16
[Picture 7] When click “TV”, Channel list show [Picture 8] Select a channel what you want up like above. Select the channel watch clicking "OK" what you want to see. button from rem ote control. - 11 -...
Terrestrial Broadcasting Recording and Watching - Recorded file through terrestrial broadcasting is saved as "PVR". (Media Center / potable storage device(USB, HDD) / pvrfiles / stream ) - "TS" refers to a transport stream, which can transmit video, audio, and data simultaneously in one stream, and is a digital format used for HDTV broadcasts.
Page 18
[Picture 2] Click potable storage device(USB, [Picture 1] Click "Media Center" from main HDD). screen. [Picture 4] Click stream. [Picture 3] Click pvrfiles. [Picture 5] Click a folder where recorded video [Picture 6] Click a video(pvr) which you want. saved. - 13 -...
Page 19
[Picture 9] Recorded video screen. - 14 -...
Other Satellite / Terrestrial Broadcasting Setup Channel List Management - Users can edit composed list themselves, also users can ide searched channel from channel list or change its name or remove channel. [Picture 1] Click “SAT/Air TV” on main menu. [Picture 2] Click “Channel Manager”.
Watching Reservation - Users can control broadcasting reservation and watching from "Timer" of TV menu. [Picture 1] Click “SAT/Air TV” on main menu. [Picture 2] Click “Timer“. [Picture 3] Click “Add Timer”. [Picture 4] Enter a desired channel, time on Timer setup, Click "Yes".
System Setup Date and Time Setup - Turn on( ) the "Wifi" when you setup the time. [Picture 1] Click setting from main screen. [Picture 2] Click "Date and Time. [Picture 3] Lift "Automatic Time Zone". [Picture 4] Click "Time Zone" [Picture 5] Select Time Zone you want.
Wireless Network (WIFI) Setup - This product support WIFI wireless network. For using WIFI there must be wireless network where product located. For activate WIFI function, check ‘ON’( ) located right upper part. Indicate connectable WIFI list. If nothing on list Check WIFI access point(AP). Connectable AP indicate automatically on the list.
Wire Network (Ethernet) Setup - This product support wire network based on internet. For using wire network, must connect wire LAN cable. This setup must be set incase of using wire network but in the majority of cases it is set by DHCP which is initial setting value setup for this product.
Other Network setup Hotspot setup [Picture 1] Click “Setting” from main screen [Picture 2] Click “WIFI” from setting screen. after turn on a hotspot function of mobile phone. [Picture 4] After “Connected” message come [Picture 5] Click “ON’( ) right upper out close setting screen and use part.
Screen of output setup(Display) Custom Display Format Setup - Generally in initial setting value (1980i 60Hz), you can watch image. If your image output device support 1080p, change to 1080p 60Hz or 1080p 500Hz to watch clear image quality. Device which support more than 1080p, set adequate frequency to image output device.
Image Setting Setup - Brightness of screen, contrast, chroma can setup through ‘Image Setting’. [Picture 1] Click “Setting” from main screen. [Picture 2] Click “Display” from setting screen. [Picture 3] Click “Image settings”. [Picture 4] Set up brightness, chroma, contrast. Initial set points are all "50.
Display area set Setup - Display area set up by Display Area set. setup for Video Output, horizontal to vertical ratio. [Picture 1] Click “Setting” from main screen. [Picture 2] Click “Display” from setting screen. [Picture 3] Click “Display area set” from display [Picture 4] Control screen rate by using arrow key.
Backup and initialization Setup - Backup Application data, Wi-Fi password and other settings at Google server. - Factory data reset make product initialize to as a first when you purchase product, and remove everything saved in storage. [Picture 1] Click “Setting” from main screen. - 24 -...
Remote Control Mouse Click Mouse button from Remote Control(Button number 6), and pressing arrow keys(Button number 18,20,21,22) then mouse point is activated. For finishing remote control mouse press mouse button from Remote Control(Button Number 6), then pointer disappear. [Picture 1] Using Remote Control Mouse figure 1. [Picture 2] Using Remote Control Mouse figure Remote control mouse response speed - How to adjust the mouse response speed of the remote control.
Firmware Update [Picture 1] Before you click “Media Center“ on [Picture 2] Click a list from USB 2.0. the main screen, save upgrade file in USB. [Picture 3] Click update file. [Picture 4] Click “YES” and update will be progressed. - 26 -...
Application(APP) Setup Application(APP) Download [Picture 1] Click “Play Store” in main screen. [Picture 2] Enter your account. [Picture 4] Login after enter a account. [Picture 3] Click "ON"( ) on right upper part and setup WIFI or LAN. [Picture 5] Search application at Play Store. [Picture 6] Install application and open.
Page 33
[Picture 8] Applications downloaded from “Play [Picture 7] Click a menu ( ) located in Store“ are in the list right bottom on the main screen. - 28 -...
Application(APP) Addition & Remove - To show up application downloaded from Play Store in main screen or remove. Application Addition [Picture 2] Select application you want to add on [Picture 1] Click “+ shape” ( ) on main menu main screen. [Picture 3] Application is added on main screen.
Miracast - Function that transfer a screen without cable.(Samsung Galaxy S7) [Picture 1] Setup devices to smart phone or mirroring [Picture 7] Click a menu ( ) located in device.(wifi on, smart view on, samsung) right bottom on the main screen. [Picture 3] Click “Miracast“...
Page 36
Miracast Setup - Function that transfer a screen without cable. (LG G5) [Picture 1] Setup devices to smart phone or [Picture 7] Click a menu ( ) located in wifi on, Share view on mirroring device.( right bottom on the main screen. [Picture 4] When you connect smart phone or [Picture 3] Click “Miracast“...
Output Device Laptop ❇ Playback Component and output equipment connect one to one [Picture 1] After connecting input device and [Picture 2] Screen which is connected with Falcon 215FS. output device by HDMI cable, Click HDMI recorder - 32 -...
HDMI Input Image Recording and Watching - To start recording, click button number 8 from remote control after connect portable storage device. Then recording start. During the recording, recording mark ( ) indicate right upper part of screen. Press stop button of remote control if you want to stop recording (button number 9 of remote control).
Page 39
[Picture 3] Click a folder where recorded video [Picture 3] Click video. saved. [Picture 4] Click a video(TS) which you want. [Picture 5] Recorded video screen. - If image don't show up connected by HDMI, try to these directions. 1) Separate HDMI cable and reconnect. 2) Turn off a device which is connected with HDMI terminal 3) Close HDMI recorder menu and retry it - 34 -...
HDMI Bitrate and Resolution Setup - In active HDMI Recorder menu, click yellow button of remote control.(button number 27 from remote control )Then you can setup record resolution and Bitrate. Initial setting value is Auto, but you can change setting optionally. It cause image quality difference. HDMI Recording Time Setup - You can see record duration option by clicking blue button of remote control In activating HDMI recorder menu (Button number 28 from remote control...
HDMI Screen Capture - You can screen capture present display by clicking red button of remote control in activating HDMI recorder menu. (Button number 25 of remote control - Still picture will be saved under a _ScreenCapture_ folder as JPG file format. [Picture 1] Click button number 25 from remote control after connect HDMI cable.
Media Center Operate - You can play a video or watch pictures which are recorded by this product or saved at external device(USB, HDD). You can watch MPEG 1/2/4. H.264, VC-1, Realvideo AVC-HD, AVI, WMV, 3GP, MPS, MOV, MPG, VOB, MKV, FLV, TS files. [Picture 1] Click “Media Center”...
Need help?
Do you have a question about the 215FS and is the answer not in the manual?
Questions and answers