Advertisement
Quick Links
Advertisement
Summary of Contents for Energica EsseEsse 9
- Page 1 EsseEsse 9 SIDE BAGS – Rack Kit Assembly instructions Autohorized Energica Dealers...
- Page 2 EsseEsse 9 Side Bags – Rack Kit Assembly instructions SIDE BAGS AND RACK KIT – ENA003986 CLASS TIGHTENING TORQUE 6 Nm 30 Nm 10 Nm 10 Nm...
- Page 3 EsseEsse 9 Side Bags – Rack Kit Assembly instructions...
- Page 4 EsseEsse 9 Side Bags – Rack Kit Assembly instructions REMOVE THE 2 RIGHT SCREWS OF THE REMOVE THE RIGHT PASSENGER FOOTPEG LICENSE PLATE HOLDER...
- Page 5 EsseEsse 9 Side Bags – Rack Kit Assembly instructions PUT THE WASHERS ON THE FOOTPEG INSERT THE 2 BUSHINGS INSIDE THE FOOTPEG HOUSING SCREWS (B)
- Page 6 EsseEsse 9 Side Bags – Rack Kit Assembly instructions FIT AND SCREW THE RIGHT FOOTPEG FIT THE FOOTPEG SCREWS IN ORDER TO MATCH THE RIGHT BAG HOLDER, THE WITHOUT COMPLETELY TIGHTENING BUSHINGS AND THE FOOTPEG...
- Page 7 EsseEsse 9 Side Bags – Rack Kit Assembly instructions REMOVE THE LEFT PASSENGER FOOTPEG SCREW THE RIGHT SIDE OF THE LICENCE PLATE HOLDER WITHOUT COMPLETELY TIGHTENING...
- Page 8 EsseEsse 9 Side Bags – Rack Kit Assembly instructions SCREW T REMOVE THE 2 LEFT SCREWS OF THE INSERT THE 2 BUSHINGS INSIDE THE LICENSE PLATE HOLDER FOOTPEG HOUSING...
- Page 9 EsseEsse 9 Side Bags – Rack Kit Assembly instructions SCREW T FIT THE FOOTPEG SCREWS IN ORDER TO PUT THE WASHERS ON THE FOOTPEG SCREWS (B) MATCH THE LEFT BAG HOLDER, THE BUSHINGS AND THE FOOTPEG...
- Page 10 EsseEsse 9 Side Bags – Rack Kit Assembly instructions SCREW T SCREW THE LEFT SIDE OF THE LICENCE FIT AND SCREW THE LEFT FOOTPEG WITHOUT COMPLETELY TIGHTENING PLATE HOLDER WITHOUT COMPLETELY TIGHTENING...
- Page 11 EsseEsse 9 Side Bags – Rack Kit Assembly instructions SCREW T TIGHTEN THE 4 FOOTPEGS SCREWS (B) AT UNDER THE LICENCE PLATE HOLDER FIT THE INDICATED SCREW (D) AND TIGHTEN AT THE TORQUE OF 30Nm / 22.1ft lb 10Nm / 7.4ft lb...
- Page 12 EsseEsse 9 Side Bags – Rack Kit Assembly instructions SCREW T ASSEMBLE THE 4 PINS ON THE LOWER PART TIGHTEN THE 4 LICENCE PLATE SCREWS (C) AT THE TORQUE OF 10Nm / 7.4ft lb OF BOTH BAG RACKETS AS SHOWED IN THE...
- Page 13 EsseEsse 9 Side Bags – Rack Kit Assembly instructions SCREW T TIGHTEN THE 4 PINS AT 6Nm / 4.4ft lb...
Need help?
Do you have a question about the EsseEsse 9 and is the answer not in the manual?
Questions and answers