KAS S1 How To Set Up

How to Setup KAS S1 Gateway

STEP 1 - Download LockKeeper App:

Android – Scan QR code

STEP 2 - Setup and Configure Gateway:

Scan QR to view latest online guides
There are two ways to setup the S1 Gateway. Please follow the instructions relevant to your wiring
requirements.
Note: You only need to follow one method.

PoE Option:

(LAN + Power Over Ethernet)

Step 1: Power up

Plug the LAN cable into the base of the gateway as pictured.

Step 2: Activate with App

You will see a solid RED LED to notify you that the gateway is
powered and in config mode.
•
Login to LockKeeper and go to the Setup Tab.
•
Click the Gateway factory number to activate it.
•
For example GWS00163

Step 3: No action necessary

The gateway will automatically assign a dynamic IP address and
connect to the network.
Note: The LAN network must be DHCP enabled.
iOS – Scan QR code

WIFI Option:

(DC Plug + WIFI)
Step 1: Power up
Plug the PC Plug into the base of the gateway as pictured.
Step 2: Activate with App
You will see a solid RED LED to notify you that the gateway is
powered and in config mode.
Login to LockKeeper and go to the Setup Tab.
Click the Gateway factory number to activate it.
For example GWS00163

Step 3: Configure WIFI network

Enter your WIFI network SSID parameters and click config.