Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR INSTALLING THE FOUNDRY FACE KIT
FOR USE WITH RAVENNA™, DESIGNER™ AND RAVELLE™ 30 GAS APPLIANCES
KIT CONTENTS
Please ensure that all these parts are in the packaging.
1 ea. Face
2 ea. Upper mounting brackets with four washers and four 10-24 nuts -
Used with model Ravelle™ 30 fireplace only
2 ea. Lower mounting brackets with four washers and four 10-24 nuts -
Used with model Ravelle 30 fireplace only
2 ea. Mounting Brackets - Used with models Ravenna™ and Designer™
f i r e - p a r t s . c o m
fireplace inserts only
Cat. No.
Model
75034
FOUNDRYF-30
Figure 1 - Foundry Face Kit
TOOLS NEEDED
Standard Flat Screwdriver
1
Description
Black Face / Black Nickel Hand-Hammered
Straps
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
P/N 900146-00
Rev. A, 04/2014
GENERAL INFORMATION
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
All of these parts may scratch and bend, great care should be used
in handling them.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO
THESE INSTRUCTIONS.
TURN OFF THE APPLIANCE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.
Check the contents of the kits upon receipt and check for any damaged
or missing parts. If there is hidden damage, notify your freight company
or IHP dealer immediately.
Be sure to clean plated surfaces with a soft cloth and household glass
cleaner prior to burning the appliance. Fingerprints left on plated
surfaces while burning may remain on the finish permanently.
INSTALLATION INSTRUCTIONS - Ravenna™ and Designer™
fireplace inserts
NOTE: See face installation instructions for Ravelle™ 30 Fireplaces
on Page 2.
Face Assembly
Step 1. Locate the two mounting brackets provided that will be used for
mounting this face on the Ravenna or Designer fireplace inserts
(see Figure 2).
Figure 2 - Ravenna and Designer Mounting Brackets
HEARTH PRODUCTS
KITS AND ACCESSORIES
FOUNDRY FACE KIT
Advertisement
Summary of Contents for IronStrike FOUNDRYF-30
- Page 1 Cat. No. Model Description BEFORE PROCEEDING. 75034 FOUNDRYF-30 Black Face / Black Nickel Hand-Hammered Check the contents of the kits upon receipt and check for any damaged Straps or missing parts. If there is hidden damage, notify your freight company or IHP dealer immediately.
- Page 2 Step 2. Remove the 3/8” nuts securing the face spacer on the right and Step 4. The top and bottom hooks will hook onto the surround brackets left side of the face (see Figure 3). Discard the spacers (used on the fireplace insert (see Figure 5). Hold the face close to the for Ravelle™...
- Page 3 Step 2. Mount the lower brackets on the available studs using the washers and nuts provided (see Figure 7). C - Lower Bracket Figure 9 Step 4. Guide a slender screwdriver through the mesh screen to thread the right and left screws into the keeper nuts, securing the face to the appliance.
- Page 4 f i r e - p a r t s . c o m IHP reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.