Safety Instructions Warning This appliance is intended for use in a domestic environment only. Any other use is not recommended by the manufacturer and may cause fire, electrical shocks or other person injury and property damage. Warning Cautions Wet hands not allowed Power Cord Hold the plug when Ensure and extension cord...
Page 5
Safety Instructions Placement Do not put flammable Do not use the appliance and explosive objects at a swimming pool or similar around the appliance in facilities in order to avoid order to avoid fire. safety hazard. Do not use the Place the appliance on a appliance in a stable, flat surface.
Product Overview Figure1 Figure2 ( 2S ) Figure3 AFTER SALES SUPPORT 0800 422 274...
Page 7
Product Overview Components 1. Front Cover 2. Top Cover 3. Control Panel 4. Air Outlet 5. Cupped lift 6. Air Inlet Filter 7. Water Tank 8. Rear Cover 9. Drainage Outlet 10. Power Cord Control Panel 11. Power Button 12. Timer button 13.
Prior to Operation ≥20cm Place the dehumidifier in an upright position on a stable, flat surface. Ensure the dehumidifier is at a safe distance at least 50cm away from a wall or furniture. Supply power should be in correspondence with the value on the nameplate, power outlet needs to be grounded.
Operation Instructions Switch On / Switch Off The Unit [ Power button ] ( 2S ) Connect to the power supply and press the power button once to turn on the unit, the unit runs by default mode on manual continuous dehumidifying with low fan speed. Press the power button to turn the unit off, the fan will continue to operate for a few seconds to blow out the hot air inside the unit.
Page 10
Operation Instructions Fan Speed Option [ Fan Speed button ] ( 2S ) Press the fan speed button to select your preferred fan speed setting of low and high to meet the different usage requirements. Fan speed button is invalid at Laundry drying mode and Defrost mode. Laundry Drying Function [ Laundry Drying button ] ( 2S ) Press the laundry drying button to...
Page 11
Operation Instructions Low Temperature Defrost Indicator ( 2S ) When the ambient temperature is too low, dehumidifier will enter into the defrost mode, the unit runs with high fan speed without dehumidifying. Auto Shut off with Water Tank Full Indicator (2S) ( 2S ) The unit will enter into standby mode when the water tank is full or the water tank is not installed properly.
Cleaning When used regularly , the filter may become clogged with dust and particles. Therefore the filter should be cleaned at least every two weeks. Follow these steps: 1. Switch the device off and remove the plug from the socket before cleaning.
Storage If the dehumidifier will not be used for a long period of time, take the following steps: 1. Remove the plug from the socket and empty the tank the tank and the dehumidifier to completely. This may take a couple of days. 2.
Trouble Shooting Check the following before contacting technical support . PROBLEM POSSIBLE CAUSE SOLUTION Insert the plug into the wall outlet The power is not connected The device does The water tank is full Empty the tank not work The tank has not Replace the tank been replaced correctly Be patient and leave the unit running for a longer...
Technical Specifications Model DYD-S10A412 Power Supply 220-240V~ 50Hz ℃ 10L/day(30 RH80%) Dehumidifying Capacity 5.0L/day(27℃ RH60%) Power Consumption 160W nominal / 225W maximum Air flow 100m³/h Water Tank Capacity 2.6L 40dB(A) Noise Level Operating Temperature 5~35℃ Refrigerant R134a Net Weight 10.5 kg Product Size (W×D×H)
Page 16
We pride ourselves on producing a range of quality home appliances that are both packed with features and completely reliable. We are so confident in our products, we back them up with a 3 year warranty Now you too can relax knowing that you are covered. Customer Helpline NZ:0800 422 274 This Product is covered by 3 year warranty when accompanied by proof of purchase.