Do you have a question about the AMI-VCD21-1600WDx and is the answer not in the manual?
Questions and answers
Sunita Patni
January 20, 2025
Current is not coming
1 comments:
Mr. Anderson
May 14, 2025
If the American Micronic AMI-VCD21-1600WDx is not receiving current, possible issues could include a faulty power cord, a blown fuse, a tripped circuit breaker, or a malfunctioning power switch. Verify the outlet has power and inspect the cord and plug for damage.
This answer is automatically generated
Cherian George
June 23, 2025
Should I remove the Hepa Filter when using as Wet Cleaner?
Summary of Contents for American Micronic AMI-VCD21-1600WDx
Page 1
OSMON WET & DRY VACUUM CLEANER Instruction Manual MODEL NO: AMI-VCD21-1600WDx...
Page 2
PLEASE READ THIS MANUAL CAREFULLY AND SAVE IT FOR FUTURE USE IMPORTANT SAFETY INSTRUCTIONS FOR THE USER Before using the vacuum cleaner, please observe these basic precautions . WARNING:To reduce the risk of fire,electric shock,or injury,never use the cleaner to pick up nails,hard chips,oils,toluene and other inflammables ...
Page 3
Parts List Handle ON/OFF Switch Top cover Blower Float Filter Cage HEPA Filter Locking Latch Accessories: Water brush tube small round brush nozzle hose filter bag...
Page 4
Assembly: Insert the hose connection wand into the hose inlet Insert the small wheel into the hole of the base. Blower function: Blower outlet Insert the joint pipe of the hose into the blower outlet Power cord storage Cord storage hook ...
Page 5
Operation Always work with an inserted cartridge filter during wet as well as dry vacuum cleaning! Dry vacuum cleaning Work only with a dry cartridge filter! Recommendation: To vacuum fine dust, use the filter bag. The filling level of the filter bag depends on the dirt that is sucked in. The filter bag needs to be replaced more frequently while sucking in fine dust, sand, etc.
Page 6
2. Remove the motor housing hanging upward with the carrying handle. MAINTAINING AND CARE Danger Turn off the appliance and remove the mains plug prior to any care and maintenance work. Repair works may only be performed by the authorized customer service. Caution Do not use abrasives, glass or universal cleaners! Never immerse the appliance in water.
Page 7
TROUBLE SHOOTING If the cleaning power of the appliance deteriorates please check the following: Accessories, suction hose or suction tubes are clogged, please remove the obstruction using a stick. Filter bag is full, empty the filter bag. Cartridge filter is dirty, knock off dirt, knock off dirt from cartridge filter and clean under running water if necessary.
Need help?
Do you have a question about the AMI-VCD21-1600WDx and is the answer not in the manual?
Questions and answers
Current is not coming
If the American Micronic AMI-VCD21-1600WDx is not receiving current, possible issues could include a faulty power cord, a blown fuse, a tripped circuit breaker, or a malfunctioning power switch. Verify the outlet has power and inspect the cord and plug for damage.
This answer is automatically generated
Should I remove the Hepa Filter when using as Wet Cleaner?