RH Baby&child DOVETAIL SHADOW BOX FULL MIRROR Assembly Instructions

D OVETAIL SHADOW B OX FUL L MIR RO R - ASS EM B LY I NST R U CT I O NS
C A R E I N S T R U C T I O N S :
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT-FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY, AND WIPE WITH A CLEAN, DAMP CLOTH.
3. WE DO NOT RECOMMEND THE USE OF CHEMICAL CLEANSERS, ABRASIVE CLEANERS OR FURNITURE POLISH ON LACQUERED
FINISH.
PARTS I N C LUD E D :
A. WALL BRACKET (1 pc.)
B. VERTICAL-HANG BACK PANEL BRACKET (1 pc.)
C. HORIZONTAL-HANG BACK PANEL BRACKET (1 pc.)
TOO L S N E E D E D (NOT INCLUDED):
Phillips-head screwdriver, hammer, drill and pencil.
S A F E T Y I N S T R U C T I O N S :
1. THESE INSTRUCTIONS ARE PROVIDED FOR YOUR
SAFETY. IT IS IMPORTANT THAT THEY ARE READ
CAREFULLY AND COMPLETELY BEFORE INSTALLING
THE FIXTURE.
2. PROFESSIONAL INSTALLATION IS STRONGLY
RECOMMENDED.
3. FOR YOUR SAFETY, IT IS RECOMMENDED THAT TWO
PEOPLE HANG THE FIXTURE.
4. CHECK WITH A PROFESSIONAL TO ENSURE YOUR
WALL CAN TOLERATE A FIXTURE WEIGHING 47 LBS.
5. IT IS IMPERATIVE THAT THE MIRROR IS MOUNTED
INTO A WALL STUD.
I N S T A L L A T I O N I N S T R U C T I O N S :
1. Carefully remove all parts from the box, and remove
all plastic coverings.
2. There are two brackets fixed on the back panel of
the mirror and one wall bracket (A) for vertical or
horizontal installation.
3. Before drilling holes to affix the wall bracket (A),
place the bubble level into the groove of the wall
bracket to test and make sure the wall bracket is
level. Use the pencil to mark the holes' positions
on the wall.
4. Drill 6 holes into the wall that align with the holes
on wall bracket (A). Using a hammer, insert drywall
anchors by gently tapping on the anchors until they
are flush with the wall. Do not insert anchors into
wall studs.
NO. ITEM
1
2
3
Figure 1
CORRECT
Wall
A
Figure 2
A
page 1 of 2
DESCRIPTION
Drywall Anchors
Wall Screws
Bubble Level
INCORRECT
Wall
A
Level
wall
1
A
2
QTY.
6 pcs.
6 pcs.
1 pc.