Advertisement
STEP 4: ELECTRICAL CONNECTIONS DO NOT PLUG IN POWER CORD INTO THE ELECTRICAL OUTLET UNTIL LEG ASSEMBLIES AND HAND-
SET ARE CONNECTED TO CONTROL BOX. Connect handset cord and leg assembly cords, to the control box. See FIGURE "I".Use wire P-clip
fasteners to secure wires to tabletop. Once connections are made, upright the table and plug in the power cord.
*WARNING: Do not swap the control box or legs with other tables, as this may cause the legs to become out of sync and cause damage.
CROSS BRACE FASTENERS (OPTIONAL)
STEP 5: LEVELING TABLE Adjust glides until work surface is level. (FIGURE "J")
5
Advertisement
