MARCUS&MARCUS HAPPITEETH Kids Premium Oral Care Set Instructions For Use

EN
Optical
sensor
LCD
SONIC ELECTRIC TOOTHBRUSH & INTERACTIVE LCD BRUSHING TIMER

Place Battery To Sonic Electric Toothbrush

1. Turn battery cover as direction (1) and pull down as (2).
2. Insert a new AAA alkaline battery with (-) and (+) in correct orientation.
3. Install battery cover as (3) and turn it rmly as (4).
2
1
Insert Toothbrush Head Into The Sonic Electric Toothbrush
1.
Plug the new toothbrush head into the
notch and twist clockwise until the
toothbrush head is secured. Wash
toothbrush head thoroughly with
warm-soapy water before initial use.
2. To replace the old toothbrush, twist the
old toothbrush head anti-clockwise
and pull it o .
HAPPITEETH
Kids Premium Oral Care Set
INSTRUCTION FOR USE
SONIC ELECTRIC
TOOTHBRUSH
Toothbrush
head
Power button
Handle
Battery cover
INTERACTIVE
LCD BRUSHING TIMER
On/O button
Adjust button
Set button
Play/Stop button
3
4
MARCUS&MARCUS
X
TOOTHBAT
Arms
Handle

Charge Up The Interactive LCD Brushing Timer

1. Insert the micro USB plug from a 5V USB power adaptor (not included) to
charge the LCD Brushing Timer for 4 hours or until battery is full. Disconnect
charger when battery icon stops ashing and in full.
2. Press button to turn on the LCD Brushing Timer and the screen will show
clock display. Flashing of battery icon shows that it is charging.

How To set Clock On Interactive LCD Brushing Timer

1. Press to turn on the LCD Brushing Timer or during screen is ON.
2. Slide the CLOCK switch at the back to
3. Press , then press to adjust hour.
4. Press , then press to adjust minute.
5. Press once nished.

How To Set Alarm Clock On Interactive LCD Brushing Timer

1. Press to turn on the LCD Brushing Timer or during screen is ON.
2. Slide to at the back to activate the alarm function.
3. To set the alarm time, press
4. Press , then press to adjust minute.
5. Press once nished, the alarm time will ash for 10 seconds and back to
the clock mode.

How To Reboot The Brushing Timer

The Brushing Timer is needed to reboot if there are no responses to any
switches even the battery has not been drained out.
Insert a straightened paperclip or tool into the reset hole when the
Brushing Timer is charging.
The screen will reboot or press
Head
RESET
to activate the clock function.
when ashing, press to adjust hour.
to turn on the Brushing Timer.
MNMRC04
Speaker
Reset
Micro USB
Charger
Alarm On/O
switch