RHINO COFFEE GEAR RCGBREW3KG Instructions

www.rhinocoffeegear.com
RCGBREW3KG
Thank you for purchasing our RHINO BREW SCALE. With normal care and proper
treatment, this scale will provide years of reliable service.

General Maintenance and Care

1. Avoid exposure to extreme heat or cold. Also avoid any kind of moisture. Always allow
your scale to acclimate to normal room temperature before use.
2. Keep your scale in a clean and dry environment. Dust, dirt, moisture, vibration, air
currents and proximity to other electronic equipment may have an adverse effect on the
accuracy and reliability of the scale.
3. Handle the scale with care. Gently apply all items to be weighed on the tray top.
Although this scale is designed to be quite durable, avoid rough treatment, as this may
permanently damage the internal parts. Always avoid shaking and dropping. This is a
precision instrument and should be handled with extreme care.

Specification and Function

1. Capacity: 3000g, Accuracy: 0.1g
2. Units: g, oz, lb: oz, ml
3. Key function: ON/OFF, UNIT, TARE, START/STOP (Timer)
4. Display: LCD display with backlight
5. Auto off: default setting is 180 seconds if inactivity; Auto off can be set to 180/300
seconds or disabled manually.
6. Power: 2 x AAA batteries
7. Operation Temp: 10 to 30 deg C
8. Beep function
9. Timer: max 99 minutes and 99 seconds

Operation

1. Place the scale on a leveled surface & press "ON/OFF" key to turn on the scale or
power it off.
2. Wait until the LCD display shows zero, then press "UNIT" key to choose the weighing
unit.
3. Place the item to be weighed on the platform and wait until the reading is stable.
Please Note:
When using the Timer Function, if any weight is removed from the weighing platform, the
Timer will pause. Take care not to bump, adjust, or remove the brewing vessel once your
brew has started. We also recommend not stirring the coffee bed as this will also trigger
the scale Timer to pause.

Tare Function

1. Turn on the scale as described above.
2. Place the "tare item" on the platform. Press "TARE" key and wait until the LCD displays