Inserting The Batteries In The Remote Control; Remote Control Range - ohmex HET 3111 Instruction Manual

HET 3111
> > Inserting the batteries in the remote control
The appliance is equipped with a remote control.
To insert or replace the batteries:
1. Remove the battery slot cover from the remote control rear part.
2. Insert the batteries (CR2025 type).
RESPECT THE POLARITIES!
3. Reposition the battery slot cover.
If the remote control is not operated for prolonged periods of time, the
batteries will discharge and the remote control won't work; in this case,
replace the batteries with the new ones.
The remote control batteries must not be exposed to excessive heat such like
sun rays, flames or similar.
> > Remote control range
Do not submit the remote control to strong vibrations or shocks.
Store the remote control away from moisture and water.
If the remote control doesn't work after replacing the batteries, remove and
reinsert the batteries after waiting about 5 minutes.
• It could result difficult to work with the remote control if the sensor on
the appliance is exposed to direct sunlight or to a strong artificial light.
• Try to make it work away from such bright sources.
• Avoid dropping the remote control, exposing it to impacts or stepping
on it.
• Do not pour water on the remote control.
• Do not use the remote control with other appliances simultaneously.
• If the appliance doesn't work even when using the remote control from
a close distance, it is necessary to replace the batteries.
USE
EN
73