Summary of Contents for Litioite AP-3035
- Page 1 USER MANUAL Home Energy Storage System AP-3035（3KW/4.8KWh） AP-3048（3KW/4.8KWh） AP-5072（5KW/7.2KWh） AP-5096（5KW/9.6KWh） Page 1...
-
Page 2: Table Of Contents
Table of Contents 1.0 Information on this Manual-------------------------------------------------------------------3 1.1 Validity---------------------------------------------------------------------------------------------3 1.2 Scope------------------------------------------------------------------------------------------------3 1.3 Target group---------------------------------------------------------------------------------------3 1.4 Safety Instructions-------------------------------------------------------------------------------3 1.5 Symbols---------------------------------------------------------------------------------------------4 2.0 Introduction----------------------------------------------------------------------------------------4 2.1 Features--------------------------------------------------------------------------------------------4 2.2 Product Overview--------------------------------------------------------------------------------5 3.0 Installation-----------------------------------------------------------------------------------------6 3.1 Unpacking and Inspection--------------------------------------------------------------------6 3.2 Installation of Machine -----------------------------------------------------------------------6 3.3 AC Input / Output Connection---------------------------------------------------------------6 3.4 PV Connection----------------------------------------------------------------------------------7 3.5 Communication Connection-----------------------------------------------------------------7 4.0 Operation-----------------------------------------------------------------------------------------8... -
Page 3: Information On This Manual
1.0 Basic Manual Information 1.1 Validity This manual applies to the following models: AP-3048 (3KW / 5KWh) AP-5096 (5KW / 10KWh) AP-5072（5KW/7.2KWh） AP-5096（5KW/9.6KWh） 1.2 Scope This Manual describes the assembly, installation, operation and troubleshooting of home energy storage system. -
Page 4: Symbols
6. In order to achieve the best operation of this home energy storage system, please select the appropriate cable size according to the regulations. 7. When disconnecting AC or DC ports, strictly follow the installation procedure. For more details, see the "installation" section of this manual. 8. -
Page 5: Features
This is a multi-function off-grid home energy storage system, integrated with MPPT solar charging controller, sine wave inverter, UPS function module and energy storage battery, which is very suitable for off-grid backup power supply and self-use. The entire system also requires other equipment for complete operation, such as photovoltaic modules, generators or utility grids. -
Page 6: Installation
Warning! Ac input and output connections using appropriate cables are important for safe and efficient operation of the system. To reduce the risk of injury, use the correct cable size recommended below. AC wire specifications: models Wire gauge AP-3035 12AWG AP-3048 12AWG AP-5072 8AWG... -
Page 7: Pv Connection
1. The open-circuit voltage of the PV module shall not exceed the maximum open-circuit voltage of the PV array of the device. 2. The open-circuit voltage of the PV module shall be higher than the minimum battery voltage. Equipment model AP-3035, AP-3048 AP-5072, AP-5096 The Max open circuit voltage of a 145Vdc... -
Page 8: Operation
4.0 Operation 4.1 Power ON/OFF After proper installation, first turn on the “battery switch” on the side to switch on the battery, then turn on the “IVT switch” to start the machine. 4.2 Operation and Display Panel The operation and display panel shown below consists of three indicator lights, four function keys, and an LCD display to indicate the operation status and input/output power information. - Page 9 by the battery or PV green Normally on Fully charged battery flashing The battery is charging Normally on Machine failure flashing Machine warning Function button Button Description To exit Setting mode To go to previous selection DOWN To go to next selection ENTER Make sure to select the mode or enter the mode LCD Display Icons...
- Page 10 Indicate output voltage, output frequency, load percentage, load in VA, load in watts, and discharge current Battery Information Indicates 0-24%, 25-49%, 50-74%, and 75-100% battery power and charging status in battery mode, flashing indicates charging, and full light indicates full charge Charging priority indicator.
-
Page 11: Fault Reference Code
4.3 Fault Reference Code Fault Code Failure Events Icon on Fan stalling Over temperature Battery voltage is too high Low battery voltage/soc Output short circuit detected internal converter components Output voltage is too high Overload time out Bus voltage is too high Bus soft start failed Main relay failure Over current or surge... -
Page 12: Warning Indicator
CAN fault Host missing 4.4 Warning Indication Warning Code Warning Event Audible Alarm Icon Flash Fan is locked while the Beep three time every machine is working second The temperature is too Beep once every high second Beep once every Battery is overcharged second Beep... -
Page 13: Specifications
5.0 Specifications Table 1 line model specifications Machine Model AP-3035, AP-3048, AP-5072, AP-5096 Input Voltage Waveform Sine (Utility or Generator) Nominal Input Voltage 230Vac Low Loss Voltage 170Vac±7V(UPS) 90Vac±7V(Appliances) Low Loss Return Voltage 180Vac±7V(UPS) 100Vac±7V(Appliances) High Loss Voltage 280Vac±7V High Loss Return 270Vac±7V... - Page 14 DC High Voltage Recovery 58Vdc Voltage Point DC High Voltage Protection 60.8Vdc Voltage Point No-load Power Consumption <35w <60w Table 3 Charge Mode Specifications Utility Charging Mode Machine Type AP-3035 AP-3048 AP-5072 AP-5096 Battery Voltage Charge Current @Nominal Input 10/15A 10/20/30/40/50/60A Voltage Equal Charging 56.4Vdc...
- Page 15 Joint Utility and Solar Charging Charging Current Default Charging 45Amp 140Amp Current Default Charging 30Amp 60Amp Current Table 4 General specifications Machine type AP-3035 AP-3048 AP-5072 AP-5096 Safety Certificate Operating Temperature 0℃~55℃ Storage Temperature -15℃~60℃ Humidity 5%~95% Size (mm) 550*300*525 550*234*1038...
-
Page 16: Trouble Shooting
6.0 Trouble Shooting LCD / LED / Explanation / Possible Problem Solution Buzzer Cause Machine shuts down LCD/LEDs Battery voltage is too 1. Recharge the battery; automatically during buzzer will 2. Replace the battery. startup prcess active seconds and then complete off 1. - Page 17 Fault code 07 overload Reduce load connection by shutting down some devices Fault code Internal component Return to repair center 08/09/53/57 failed Fault code 51 Overload or shock Restart the machine, if the error occurs again, please return to Fault code 52 Bus voltage is too low the repair center Fault code 55...