Cleaning The Device; Electrodes; Cleaning And Maintenance - LG TEC Multi Instruction Manual

7. CLEANING AND MAINTENANCE

7.1 Cleaning the device

1) Remove the batteries from the device every time before
cleaning.
2) Clean the device with a soft, slight moistened cloth. In case
of more extreme soiling you can also moisten the cloth with
mild soapy water.
3) Do not use any chemical cleaners or abrasive agents for
cleaning.

7.2 Electrodes

1) Use the device only with the leads and electrodes provided
by the manufacturer. Use only the electrode placements
and stimulation settings prescribed by your practitioner.
2) It is recommended that, at minimum, 1.5" x 1.5" self -
adhering based, square electrodes are used at the
treatment area.
3) Inspect your electrodes before every use. Replace electrodes
as needed. Reusable electrodes may cause slight skin
irritation, lose adhesion and deliver less stimulation if
overused
To use these electrodes:
Attach the electrode to the lead wire.
Remove the protective backing from the electrode surface.
Do not throw away the protective backing because it is
reused after the treatment session has been completed.
Place the tacky surface to the prescribed skin area by
pressing the electrode firmly against the skin.
Adhesive Pad
Reusable, Self-adhering electrodes
28
Connector for
inserting Lead
wire Pin