Download Print this page

Colop e-mark Manual

Hide thumbs Also See for e-mark:

Manual

Causes



Make sure the ambient temperature is within the

recommended operating temperature. Excessively high

temperatures accelerate the desiccation process, while too

low temperatures can cause the ink to freeze. If the cartridge

was exposed to such a temperature, place it in an operating

temperature environment and allow it to acclimatize for a

period of time (at least half an hour).



After a shutdown period of several days, the print head may

be dried out.



If the e-mark hasn`t been into the docking station he will dry

out.



If the docking station's protection cap does not seal properly,

it may cause the printhead to dry out.



If the protection cap of the docking station is too dirty, it may

cause the printhead to dry out.

Dried Printhead

Table of Contents

Do you have a question about the e-mark and is the answer not in the manual?

Page 1  After a shutdown period of several days, the print head may be dried out.  If the e-mark hasn`t been into the docking station he will dry out.  If the docking station's protection cap does not seal properly, it may cause the printhead to dry out.
Page 2 (or with the damp cloth). o Place the e-mark on paper. o Press "Start quick cleaning" again. o The e-mark is now ready for use again. A test image can be printed to test the print quality.  If the problem is not resolved after the first cleaning, do it a second time or replace the...