Page 3
Important Safety Instructions Power Supply The power adapter is designed to operate from a 230Volts, 50Hz AC mains supply. If the power adapter becomes damaged, it should be replaced with an adapter of the same type and rating to avoid a hazard. Battery Handling and usage Only adults should handle the batteries.
Page 4
INSTRUCTION MANUAL OF BRANDT TCR96P Alarm CLOCK RADIO WITH DUAL ALARM AND DIGITAL TUNING UK. 2...
Page 5
INSTALLATION Plug the supplied AC/DC adaptor (Input voltage 230V AC) (Output voltage 6V DC) to an AC household outlet, and then plug the DC jack to the back of the clock radio. Your clock radio is ready to work for you. BATTERY BACK-UP INSTALLATION Slide opens the battery cover at the bottom of your unit.
Page 6
TO USE THE PROJECTION CLOCK Press PROJECTION button to turn on or off the projection clock. Turn the focus knob on the projector to adjust the image of the projected time onto the wall or ceiling. TO USE THE HI-LO-OFF DIMMER This clock radio features an adjustable display backlight with “high / low / off”...
Page 7
TO USE THE SLEEP TIMER 1. Pr ess the RADIO/SLEEP twice to enter the sleep mode. The clock display shows the SLEEP icon and “5” (5 minutes) and flashes keep pressing the RADIO/SLEEP to select a 10-, 15-, 30-, 45-, 60-, 75-, 90-minute sleep timer. The sleep timer display remains for few seconds and then returns to normal clock display.
Need help?
Do you have a question about the TCR96P and is the answer not in the manual?
Questions and answers