Summary of Contents for Maxflow LCA 140/11
- Page 1 CBD Powerwashers LTD Loncin G200 Washer (Model shown above is direct drive variant)
- Page 2 CONTENTS • PAGE 1 CONTENTS PAGE • PAGE 2 INTRODUCTION TO THE CUSTOMER • PAGE 3 OPERATING INSTRUCTIONS • PAGE 4 TROUBLESHOOTING F.A.Q. • PAGE 5 SPARE PARTS ODERING PROCEDURE • PAGE 6 THE CBD PRODUCT GUARANTEE • PAGE 7 EC DECLARATION OF CONFORMITY •...
- Page 3 INTRODUCTION TO THE CUSTOMER The CBD Power Product you have received has been designed and manufactured with great care from first-class materials. We are confident that it will perform safely and satisfactorily over a long period, providing that the instructions and maintenance detailed in this booklet are followed.
- Page 4 OPERATING THE WASHER Position the washer at a convenient place within your work area, ideally in an airy room or outside where you can easily start the machine and connect hoses etc. If there is not enough air, a malfunction or an overheating may occur. Now you can follow these simple step-by-step instructions: 1.
- Page 5 If after the procedures have been carried out and the machine still does not function, please contact our service department. It is suggested that you have your machine routinely maintained and serviced by a fully trained CBD power agent or engineer on a yearly basis. SPARE PARTS ORDERING PROCEDURE When ordering spare parts for your washer, the following procedure must be observed: •...
- Page 6 Any allegedly defective part or parts returned to the Sellers must be sent carriage paid. No claim for repair or replacement will b e entertained unless upon discovery of the alleged defect written notification is sent to the Sellers giving, at the same time, the name of the Buyer from whom the goods were purchased and the date of purchase together with full details of the alleged defect and the circumstances involved, also the serial number of the machine etc.
- Page 7 _____________________________________________________ _____________________________________________________ _____________________________________________________ _____________________________________________________ has been designed and manufactured to conform with the following directives: • The EC Declaration of Conformity for Machines (Directive 98/37/EC) • The Supply of Machinery (Safety) Regulations 1992 (S.I. 1992/3073) as amended (S.I. 1994/2063) • The Electrical Equipment (Safety) Regulations 1994 (S.I. 1994/3260) This washer complies with the EEC directives given above and those by its component manufacturers.
- Page 8 damages to the machine and/or injuries to the personnel if it is not carried out according to the safety standards. WARNING This symbol ‘of a triangle with an explanation mark inside’ warns the personnel concerned that the described operation may cause serious injuries or death to the personnel if it is not carried out according to the safety standards.
Need help?
Do you have a question about the LCA 140/11 and is the answer not in the manual?
Questions and answers