Advertisement
Quick Links
Visit portable receiver
Buttons and controls
Power LED
Volume
Flash LEDs
Test button
Technical specifications
In the box
BE1450 Portable receiver
4 1.5V LR14 batteries
Wall bracket
Screws and wall plugs
Power and battery
Mains power
7.5 V DC / 1000 mA
Optional power supply unit
Europe: BE9275+BE9268
UK: BE9268+BE9276
Battery power
4 1.5 V LR14 alkaline batteries
Operating time
2 – 3 years with alkaline batteries
Power consumption
Active: 1000 mA
Idle position: 0.1 mA
Visit LEDs
Recessions for wall bracket
Dimensions and weight
Height: 165 mm, 6.5"
Width: 130 mm, 5.1"
Depth: 36 mm, 1.5"
Weight: 590 g, 20.8 oz. incl. batteries
Visit LEDs
The Visit LEDs normally indicates
the following:
Orange LED, pacifier symbol
The baby monitor is activated
Green LED, door symbol
The door transmitter is activated
Yellow LED, telephone symbol
The phone transmitter is activated
Red LED, fire symbol
The smoke alarm is activated
Flash signal switch
Battery compartment
Output
Adjustable sound signal
Max 93 dBA @ 1 m, frequency
range: 500 – 1000 Hz
Bed shaker outlet: 2.0 – 4.0 VDC or
Speaker outlet: 10 kΩ, 0 – 4 V
Frequency and coverage
Radio frequency
314.91 MHz, 433.92 MHz or 868.30
MHz, depending on the region
Coverage
50 – 250 m, 55 - 273 yd. depending
on the radio frequency and the
characteristics of the building
Accessories
BE1270 Bed shaker
Power supply unit,
Europe: BE9275+BE9268
UK: BE9268+BE9276
BE1450 | BE1452
BE1270 Bed shaker
BE1450
Optional power supply
Advertisement
Related Manuals for Bellman BE1450
Summary of Contents for Bellman BE1450
- Page 1 Visit portable receiver BE1450 | BE1452 Buttons and controls Power LED Volume Flash LEDs Visit LEDs Flash signal switch BE1270 Bed shaker BE1450 Test button Recessions for wall bracket Battery compartment Optional power supply Technical specifications In the box Dimensions and weight...
- Page 2 Visit portable receiver Getting started Slide open the battery cover, fit the batteries and close the cover again. Place the receiver on a level surface or mount it on the wall using the wall bracket. To test the radio link you need a Visit transmitter. Press the test button/s on the transmitter. The receiver lights up a Visit LED and starts to flash and sound.
- Page 3 Visit portable receiver Changing the radio key If your Visit system is activated for no reason, there is probably a nearby system that triggers yours. In order to avoid radio interference, you need to change the radio key on all units. The radio key switches are located on the transmitters. Here is how you change the radio key: Open the transmitter cover and move any radio key switch to the up (on position) to change the radio key.
- Page 4 Visit portable receiver Advanced programming By using advanced programming, you can customize the signal pattern from a specific transmitter and event, displaying the LED colour, sound and vibration pattern of your choice. The advanced programming overrides the radio key and pairs the units via the serial number.