CONCORD Detail Steel Hutch Installation Manual page 3

1.FIRST, ALIGN LH SUPPORT WITH BACKWALL SO THE SELF
CUTTING SCREWS FASTENS THE LH SUPPORT WITH THE
BACKWALL. REPEAT STEP FOR THE RH SUPPORT
BACKWALL WITH
2
SLOTTED END
SEE
CHANNELS
NEXT
PAGE
1
"L" ANGLE
MOUNTED ON
THE INSIDE OF THE
LH SUPPORT
"L" ANGLE SLIDES ON THE INSIDE OF
THE RH AND LEFT HAND SUPPORT
INSTALL SEQUENCE
TOP VIEW OF BACKWALL AND SHELF
SUPPORT DETAIL
LH SUPPORT
WORKTOP
3
BACKWALL WITH SLOTTED
END CHANNELS
SELF CUTTING
SCREW
LH SUPPORT
THE "L" ANGLE SLIDES ONTO
THE WORK SURFACE AND #10
SELF CUTTING SCREWS IS
USED TO SECURE THE HUTCH
TO THE WORK SURFACE
2