Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for logitrans SELFMDT
Summary of Contents for logitrans SELFMDT
- Page 1 MULTI DRUM TURNER SELFMDT, SELFSMDT...
- Page 2 • Directive no. 2014/35/EC b) has been manufactured in conformance with the stipulations of the standard: • EN ISO 3691-5 Responsible for the technical dossier: Gitte Kirkegaard Name: Hillerupvej 35, DK-6760 Ribe Address: Signature: Gitte Kirkegaard, CEO, Logitrans A/S Ribe, 20.02.2020. B148 D201-1...
-
Page 3: Table Of Contents
Contents 1.0 Before the first lift....................4 2.0 Functions and identifications ................5 3.0 How to operate Multi drum turner ..............6 3.1 Handling of drums ....................... 6 3.2 Use of the Multi drum turner ....................7 3.3 Handle functions ........................8 3.4 Personal safety ........................ -
Page 4: Before The First Lift
1.0 Before the first lift... The Multi drum turner is manufactured in accordance with safety directives. Among the subjects dealt with in this Instruction Manual are: • Proper application • Physical limitations of the product • Risks with improper use Therefore please read this Instruction Manual carefully! -
Page 5: Functions And Identifications
2.0 Functions and identifications 1. Handle 2. Lift/Lower 3. Horn 4. Forward/Reverse 5. Safety switch 6. Multiflex function 7. Carriage 8. Clamp 9. Gripping arm 10. Height adjustment pipe 11. Top lock 12. Locking plate 13. Type plate, serial number 14. -
Page 6: How To Operate Multi Drum Turner
3.0 How to operate Multi drum turner 3.1 Handling of drums SELFSMDT Handling of drums on closed pallets - Use the Multi drum turner with straddle legs! SELFMDT... -
Page 7: Use Of The Multi Drum Turner
3.0 How to operate the Multi drum turner 3.2 Use of the Multi drum turner Conditions for rotation: Center of the gripping arms is lifted at least: 430 mm The load can be rotated 360°. Insert key (1) and turn clockwise to switch on control current ready for function activation. -
Page 8: Handle Functions
3.0 How to operate the Multi drum turner 3.3 Handle functions... - Page 9 3.0 How to operate the Multi drum turner Multiflex-function Multiflex-function • This function makes it possible to drive the Multi drum turner, even though the handle is in its upright, braked position (B) • The function requires two-handed operation, i.e. it must be performed deliberately •...
-
Page 10: Personal Safety
3.0 How to operate the Multi drum turner 3.4 Personal safety The safety switch on the end of the handle ensures that the operator cannot be trapped when the Multi drum turner is reversed. When the safety switch is activated, the Multi drum turner will change direction, move forwards and stop. -
Page 11: Remote Control Mr-1 / Lifting-Lowering-Rotation-Clamping
3.0 How to operate the Multi drum turner 3.5 Remote control MR-1 / Lifting-Lowering-Rotation-Clamping The remote control is used for: • Lifting/lowering the carriage/load • Rotating the clamps/load • Clamping/fixing the load • Releasing the load • Moving the gripping arms horizontally... -
Page 12: Remote Control / Lift And Lower / Rotation
3.0 How to operate the Multi drum turner 3.6 Remote control / Lift and lower / Rotation Press (A) to lift. Press (B) to lower. NOTE! The lowering height with remote control is set from factory - 430 mm to the middle of the gripping arms. Rotation: NOTE! Check that the load is placed in the load center and is... -
Page 13: Remote Control / Clamping Of Drums
3.0 How to operate the Multi drum turner 3.7 Remote control / Clamping of drums The height is adjusted, so that the clamps (8) are placed approx. 5 cm above the middle of the drum, and the top lock (11) is moved to upper position. The clamps (8) are adjusted to the drum diameter. - Page 14 3.0 How to operate the Multi drum turner Clamp slightly around the drum, and lower the gripping arms (9), until the locking plate (12) locks at the edge of the drum. Close the gripping arms (9) to fully and safely clamp the drum. The top lock (11) is adjusted to the top of the drum and is tightened.
- Page 15 3.0 How to operate the Multi drum turner Clamping: Press “Clamp” until the drum is safely fixed. If “soft drums” are to be handled and a liquid to be poured out of the drum when reversed, take off the lid before clamping the drum. An overpressure may occur that might cause spraying out liquid.
- Page 16 3.0 How to operate the Multi drum turner Larger drums HAVE TO be secured with “Drum top lock”. Smaller drums SHOULD be secured with “Drum top lock“. Small drums and cans are NOT secured with the “Drum top locks“. If using small drums and cans, remove “Drum top lock”. If using larger drums If using smaller drums and cans...
-
Page 17: Remote Control / Clamping Of Small Drums And Cans
3.0 How to operate the Multi drum turner 3.8 Remote control / Clamping of small drums and cans The gripping arms (9) in open position are placed around the drum/can. The clamps (8) are adjusted to the size (diameter) of the drum/can. Clamp around the drum/can. -
Page 18: User-Interface Lui-1 Multi Drum Turner
3.0 How to operate the Multi drum turner 3.9 User-Interface LUI-1 Multi drum turner User-Interface LUI-1 for: • Setting speed for rotation • Setting up to three stop position/angles in both rotation directions • Setting end stop limit for gripping arms (inner/outer) -
Page 19: Setting Up User-Interface Lui-1 Multi Drum Turner
3.0 How to operate the Multi drum turner 3.10 Setting up User-Interface LUI-1 Multi drum turner 3.10.1 Home display When starting the machine/deactivating of emergency stop in User-Interface LUI-1, home display is shown. 1. Position of gripping arms - With green arrow - horizontal (0°) - With red arrow - programmed angle 2. -
Page 20: Setting Of Rotation Speed
3.0 How to operate the Multi drum turner 3.10.3 Setting of rotation speed At the Setup display, press “SPEED” and the following is shown. 1. Use ➕⁄➖ to adjust the speed. 2. Use ✔/✖ to accept/cancel the choice and return to Setup display. 3.10.4 Setting of stop position From the factory, the clamps are set to rotate continuously. -
Page 21: Deleting Stop Positions
3.0 How to operate the Multi drum turner At the Stops display, press on the first stop in the requested direction, and the following is shown. 1. Use ➕/➖ to choose the size of the angle or use TEACH to choose actual position. -
Page 22: Deleting End Stop Limit Positions
3.0 How to operate the Multi drum turner At the Home display, press Setup and afterwards Endstop limit (LIMIT), and the following is shown. At the Endstop limit display, choose outer (1) or inner (2), and the following is shown (e.g. -
Page 23: Intended Use
Any use beyond this is contrary to the intended use. Logitrans A/S is not liable for damages because of this; the risk is the sole responsibility of the user. 3.12 Unintended use •... -
Page 24: Unacceptable Use
3.0 How to operate the Multi drum turner 3.13 Unacceptable use The operating safety of the delivered machine can only be guaranteed, if used in accordance with the intended use as described in this instruction manual. The limits given in the data sheets must under no circumstances be exceeded. Never use the machine as a crane or stand platform. - Page 25 3.0 How to operate the Multi drum turner Safety instructions for maintenance and inspection • The user must ensure that maintenance, inspection and assembly are carried through by authorised and qualified persons, who, after careful reading of this instruction manual, have sufficient knowledge. •...
-
Page 26: Optimum Safety
4.0 Optimum safety The safety instructions in the instruction manual, the applicable national accident prevention regulations and internal working, operating and safety regulations, if any, must be observed. ATTENTION Moving parts 4.1 Safety regulations • Never walk under a raised load! •... -
Page 27: Rotation Range
4.0 Optimum safety 4.2 Rotation range Standard version When the turning point is raised about 430mm, you can rotate. Below this area, the gripping arms can not be rotated and the carriage can not be lowered by the remote control. 4.3 Driving loaded The load centre is never allowed to exceed the centre line of the wheels. -
Page 28: Rotation With Load
4.0 Optimum safety 4.4 Rotation with load NOTE! Rotation is only allowed to take place, if the machine is placed on an even surface. When rotating, the user needs a full overview of the whole working area, so that the rotation movement can be stopped, before the load touches floor, items or persons in the working area. -
Page 29: Safety Labels
4.0 Optimum safety 4.6 Safety labels Do not stand on or under the carriage/forks/ equipment Remote control on this machine. Clamping risk for hands and feet. MAX LOAD The maximum allowed load appears from the label 350 kg on the machine. Do not exceed this capacity. Do not step here. -
Page 30: Additional Safety Advices
4.0 Optimum safety 4.7 Additional safety advices Training: The user must be competent and fully able to perform the work with this machine in a safe and efficient way. Safety equipment: Required: Wear the following safety equipment when working: Safety shoes. Please note the following risks: •... -
Page 31: There Must Be A Current Supply
5.0 There must be a current supply... 5.1 Fuses - replacement There are five fuses in the electrical circuit: 60 Amp fuse for clamping/rotation 100A 100A 100 Amp fuse for the hydraulic pump 100 Amp fuse in the main supply from battery 10 Amp fuse in the control current circuit... -
Page 32: Maintenance
6.0 Maintenance The machine may only be used and maintained by persons who are familiar with the machine and are instructed in the possible hazards. Responsibilities, competence and staff monitoring must be regulated precisely by the responsible operator. The responsible operator must ensure that the contents of the instruction manual are understood. -
Page 33: Good Service After Purchase
Such affected parts shall be sent to your Logitrans dealer carriage paid within the warranty period in force at the time in question, together with a copy of the documentation for the service performed (B0284 - see the back page). - Page 36 Service inspection is required once each year, or at least for every 500 hours of operation. Safety inspection should be performed by the dealer or other qualified persons at least once each year, unless local regulations state otherwise. S1057 SELFMDT-SELFSMDT-EN 20022020/2...