Page 1
Handshowers Installation Guide Thank you for purchasing this Par Taps product designed and built Ver 20.2 in australia...
Page 2
Important Information Prior to Installation: • Please read these instructions completely. • All instructions serve as a guide only and must be installed by a licensed plumber in accordance with AS/NZS 3500.1. Installation carried out by unlicensed individuals will void all warranties. • Supply lines must be flushed prior to installation to remove any foreign matter. • All products are suitable for use with most instantaneous hot water heaters, however are not compatible with gravity-fed water systems. • Please check all measurements prior to drilling holes in Mounting Guide Please Note: If there is no mounting bracket supplied for your accessory, skip to Step 2. If a bracket is supplied, position it on the wall in the desired mounting location, preferably where a wall noggin is located Mark the intended mounting points.
Page 3
Burj Rail Handshower Grub Screw Wall Screws Wall Bracket Wall Plugs Flange Hose Connection Hose Note: Please ensure that handshower dock opening is on the right hand side of rail...
Page 5
Lugano Rail Handshower Wall Bracket Wall Screws Grub Screw Wall Plugs Flange Hose Connection Hose Note: Please ensure that handshower dock opening is on the right hand side of rail...
Page 6
Forme Rail Handshower Wall Bracket Wall Screws Wall Bracket Cover Wall Plugs Flange Hose Connection Soap Dish Hose Note: Please ensure that handshower dock opening is on the right hand side of rail...
Page 7
Tudor + Bell and Vogue Handshower Rail Decorative Nut Rail Screw Wall Flange Wall Bracket Wall Screws Wall Plugs Wall Hose Flange Hose Connection Hose Note: Please ensure that handshower dock opening is on the right hand side of rail...
This manual is also suitable for:
Oracle handshowerLugano handshowerForme handshowerTudor + bell and vogue handshower