Advertisement
5.3.3.
FAN ON/SPEED CONTROL BUTTON :- Press to switch on, press again to scroll trough speed settings.
5.3.4.
OSCILLATING BUTTON :- Press to switch on oscillation, press again to switch off oscillation.
5.3.5.
STOP BUTTON :- Switches fan off
5.4.
remote control
5.4.1.
FAN ON/SPEED CONTROL BUTTON :- Press to switch on, press again to scroll trough speed settings.
5.4.2.
OSCILLATING BUTTON :- Press to switch on oscillation, press again to switch off oscillation.
5.4.3.
STOP BUTTON :- Switches fan off.
5.4.4.
TIMER BUTTON :- Press to select working time, 1,2,4, or 7.5 hours indicated by the LED lights on the fan control panel (ie. by
adding the selected fig. displayed above LED.)
note: As the timer counts down the speed of the fan will reduce
5.4.5.
6. cleaninG
6.1.
Be sure your fan is in the OFF position.
6.2.
unplug the fan before cleaning.
6.3.
use only a soft, damp cloth to gently wipe the fan.
6.4.
do not immerse the fan in water and never allow water to enter the motor Housing.
6.5.
do not use petrol, paint thinner or other chemicals to clean the fan.
6.6.
to access the fan blade, remove the front grill and blade securing knob.
6.7.
clean the fan blade, front and rear grills with a soft, moist cloth.
6.8.
replace blade, tighten securing screw and securely fasten the front grill.
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
battery removal
See Section 4.3
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered wih Valpak's
registered compliance scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
sole uK distributor, sealey Group.
Kempson Way, Suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7AR
Original Language Version
01284 757500
01284 703534
sWF18WR | Issue 1 17/02/17
www.sealey.co.uk
sales@sealey.co.uk
Advertisement
