Advertisement
Quick Links
Advertisement
Summary of Contents for CG ELV
- Page 1 CG Technology Official tutorial Mercedes-Benz ELV Simulator Operating Instructions...
- Page 3 一、 Arbitrary Erase...
- Page 4 The Mercedes-Benz ELV simulator produced by CG Technology has convenient functions not available in other similar products. One-click matching and manual initialization, combined with the use of CGMB-Benz monster equipment, save time and effort, can be used multiple times, and...
- Page 5 Method 1: Software Operation The first step is to connect the simulator, both the real car and the platform. As long as it can communicate, open the software and enter the “ELV-ELV Simulator" option...
- Page 6 Method 1: Software Operation Second step, click on "Erase Simulator "...
- Page 7 Method 1: Software Operation The third step is to clamp the yellow clip on the OBD line to the 3 pin position of the simulator...
- Page 8 Method 1: Software Operation The fourth step is that the reset is successful...
- Page 9 Method 1: Software Operation The fifth step, read the verification, the simulator password shows 0, has been activated without checking...
- Page 10 Method 2: Manual Operation The first step is to prepare a toothpick or tweezers. Other thin objects can also be used.
- Page 11 Method 2: Manual Operation The second step is to connect the simulator, insert it into the reset hole of the simulator with a toothpick or tweezers, press it 5 times, you can hear a click, it means it has been wiped...
- Page 12 Method 2: Manual Operation The third step, you can enter the software to read the verification, it has been activated without checking...
- Page 13 二、Replace The Original Car ELV...
- Page 14 The first step is to collect the Password of the vehicle. Both the real vehicle and the platform can be used.
- Page 15 The second step is to save the lock data with the Password...
- Page 16 The third step is to connect the simulator, as long as it can communicate, open the software and enter the "ELV-ELV Simulator" option...
- Page 17 The fourth step is to read the simulator to ensure that the simulator is inactive. If it is activated, please wipe it first.
- Page 18 The fifth step is to load the lock data with the key password just saved...
- Page 19 The sixth step is to write the simulator. The prompt is successful. Please insert the key into the lock and turn on the ignition to activate it.
- Page 20 Step 7. Verify that the meter and vehicle can be turned on...
- Page 21 The eighth step, you can perform secondary verification, read the activated simulator to see if it is activated...
- Page 22 Facebook :https://www.facebook.com/carcgprog whatsapp/wechat:86-15112563501 Website: http://www.cg100procar.com...
Need help?
Do you have a question about the ELV and is the answer not in the manual?
Questions and answers