Summary of Contents for BERG Captain's Bed for Two 22-741 Series
Page 1
Dec. 16 2013 Captain’s Bed for Two (Twin/Twin) 22-741-XX Important Read All Instructions before Assembling. Please Save Instructions For Future Use. WARNING! PACKAGING MATERIAL, SMALL PARTS & PLASTIC BAGS ARE HAZARDOUS TO SMALL CHILDREN. PLEASE DISPOSE OF THEM IMMEDIATELY! WARNING LABEL MUST NOT BE REMOVED FROM UNIT. BEFORE ASSEMBLING •...
Page 2
General Hardware & Instructions (Location: With the Top Bed Rails in Box #4) Hardware for the Bottom Bed (Located with the bottom bed rails in Box #7) 1 x Allen Key HARDWARE BAG WILL INCLUDE: 8 x Barrel Nuts 8 x 2-1/2” (60mm) Allen Head Bolt 8 x 2-1/2”...
Page 3
STEP 1: Remove the supporting wood from the bottom of the housing and dispose of it. See Pic 1 & 1A. ↔ Pic 1 Pic 1A STEP 2: Position the back unit, the 3 drawer cabinet and the bed housing unit together as shown in Pic 2 & 3. Remove the drawers and place them safely on the side.
Page 4
STEP 4: Using the pre-installed bracket on the back of the housing (See Pic 5) and the pre-installed bracket on the back of the cabinet (See Pic 6) connect the housing unit and the cabinet to the back unit (See Pic 7 & 8) using 2 x 3/4"...
Page 5
Attach the front rail to the base units using 6 x ¾" wood screws and the 3 x pre-installed brackets. STEP 7: See Pics 15, 16 & 17. Make sure the bedrail is straight. Pic 15 Pic 16 Pic 17 FOOTBOARD STEP 8: Using 1 x L-Shaped bracket and 4 x ¾”...
Page 6
ATTACHING THE STAIRCASE - Connecting the handrail to the stairs STEP 11: Carefully remove the 3 drawers from the stair unit (Pkg 8) and place them on the side. STEP 12: Connect the handrail to the left side of the stairs (using the hardware located in the top drawer Attach the handrail using 3 x 2-1/2”...
Page 7
STEP 15: Attach the stair unit to the bed using 3 x 1-3/8” wood screws and the pre-drilled holes as shown in Pic 29, 30 & 31) Pic 29 Pic30 Pic 31 ASSEMBLING THE TWIN BOTTOM BED STEP 16: Assemble the bottom bed frame using the bed rails (Pkg 7) and the headboard and footboard (Pkg 6) Using 8 x 2-1/2”...
Page 8
STEP 18: Space the 8 wood slats evenly between the bed rails. Leave approximately 3-1/2" ( 90mm) of space between the slats and secure each rail with 2 x 1-1/4” wood screws (1 from each side) See Pic 36, 37 & 38. Pic 36 Pic 37 Pic 38...