Using Your Vector Lamp; Dimmable Lamp And Colour Changing Modes; Shut-Down Timer; Wireless Charging - Liteworks Vector AUL1023 Quick Start Manual

Using your Vector Lamp

To turn on the lamp, plug the adaptor into power socket and gently tap the "OFF / ON
switch.

Dimmable Lamp and Colour Changing Modes

1. To adjust the brightness, gently tap and hold the "
control panel. This action will adjust to Min/Max Brightness.
2. To adjust the colour temperature settings, tap the "M" button located on the light
control panel. The settings will cycle from Natural, Cool and Warm Light. Tap between
the settings below.
Warm(2700K)

Shut-Down Timer

1. To set Shut-Down Timer, gently hold down the "
when this function is activated, the lamp will shut down after 40min period. To reset this
function, gently hold down the "

Wireless Charging

The wireless charger is only compatible with smartphones that support wireless charging.
Tested with the following phones:
- Samsung Galaxy models from S6 and above.
- Apple iPhones version 8 and above.
1. To wirelessly charge device: After turning on Vector Task Lamp, place compatible device
over the wireless area of the Lamp base. The Power/Battery icon on your device should
light up to indicate connection for wireless charging. Note: The device will only charge
when placed on base. For optimal charging, device should be placed on centre of lamp
base.

Lamp Adjustment

1. To adjust the angle/direction of the lamp: Please note only the neck of the lamp post
can be rotated/bent. Adjustment of the lower portion of the lamppost may result in
damage of the lamp.
Natural (4300K)
" button, for a new 40min period to begin.
" button located on the light
Cool (5500K)
" button. The lamp will flash twice
"