TME AX-B150 Manual

1. Safety instructions

Failure to follow the instructions listed below may result in electric shock or personal injury.
• Please read this manual carefully and thoroughly before using this product.
• Do not remove any labels from the tool.
• Keep the work area clean and well lit, cluttered and dark areas may cause accidents.
• Do not operate the tool with the presence of flammable/explosive gases.
• Do not use the product around corrosive chemicals, which can ruin the picture quality.
• Keep bystanders, children and visitors away while operating the tool.
• Stay alert, watch what you are doing and use common sense. A moment of inattention will result in
serious personal injury.
• Keep proper footing and body balance all the time.
• Always wear protective eyewear. Dust mask, non-skid safety shoes, hard hat or hearing protection must
be used for appropriate conditions.
• Do not place this product on trolleys or other slippery slopes. The product may fall off and cause serious
injury to a person or damage the product.
• For safety please always keep the video inspection away from any kind of liquid. Liquid increases the
risk of electrical shock and damage to the product.
• Do not use this device for personal or medical use.
• The unit is not shock-resistant. Do not use it as a hammer or drop it.
• Remove the batteries before long term storage to prevent battery leak from damaging the instrument.
• Please dispose the batteries properly. High temperature will cause explosions and do not burn the
batteries. Strap insulated tape around the battery charges to avoid unsafe contacts with other objects.
Please follow the local regulations of battery disposing.
AX-B150 Video Inspection Camera