Subscribe to Our Youtube Channel
Related Manuals for Philips Lifeline GoSafe 2
Summary of Contents for Philips Lifeline GoSafe 2
- Page 1 Medical Alert Service Quick Setup Guide Start here GoSafe 2 Mobile Medical Alert Service For Canada Quick Setup Guide...
- Page 2 GoSafe 2 Mobile Medical Alert Service Area Instructions for use 9 Press the Help Button Press Area on your GoSafe 2 Mobile Button once and follow the voice prompts when you are ready to move onto the next step. For setup assistance at any time during this process call: 1-800-387-1215...
- Page 3 *The GoSafe 2 Mobile Button provides an extra layer of protection by placing a Help Call if a fall is detected and you can’t push the placing a Help Call if a fall Help Button.
- Page 4 STEP 2 Learn about charging 9 Plug the power cord of your 9 Place your GoSafe 2 Mobile Charger into a power outlet. Button around your neck. 9 Attach the Charger to your GoSafe 2 Mobile Button. For setup assistance at any time during this process call: 1-800-387-1215...
- Page 5 You need to charge your GoSafe 2 Mobile Button whenever the Indicator Light flashes orange. Note: Your Button may tell you that it Flashing orange = needs to remain in charging needed the Charger for a short period during this step. Don't worry –...
- Page 6 Do you need help? Please wait. 9 Press the Help Button Press 9 Wait while your first call to Philips Area on your GoSafe 2 Mobile Lifeline is connected. It may take Button. approximately one minute to connect your first call.
- Page 7 Centre, or your Button tells you to move to another area due to low signal strength, call 1-800-387-1215 from your home phone for assistance with this specific issue. The GoSafe 2 Mobile Button must have sufficient cellular signal available to complete this call and to work reliably inside of your home.
- Page 8 9 Make sure the Charger is Typically, it will take less than 45 plugged into a power outlet. minutes to charge your GoSafe 2 Mobile Button. It is fully charged 9 Attach your GoSafe 2 Mobile when the Indicator Light turns to a Button to the Charger.
- Page 9 Your GoSafe 2 Mobile Button will automatically call for help if it detects a fall during any of these activities.* Your GoSafe 2 Mobile Button will not work if the third party cellular network is unavailable. Be sure to read the Instructions for Use provided with your system.
-
Page 10: Welcome To Philips Lifeline
As a Philips Lifeline subscriber, you Enclosed with your system, you will should have designated people who find a copy of Philips Lifeline’s Terms have agreed to be “Responders.” and Conditions. Please take the time These are people whom Philips to carefully review this document. - Page 11 If you not agree with the Terms and Conditions, have questions about your do not activate your system, and call GoSafe 2 System or service, Philips Lifeline. please contact Philips Lifeline at Thank you for choosing Philips Lifeline!
- Page 12 100% of falls. If you need help, always press the Help Button press area 111 Lawrence Street 95 Barber Greene Road, Suite 105 if you are able to do so. The GoSafe 2 Mobile Button will not work if the Framingham, MA 01702-8156 Toronto, Ontario, Canada M3C 3E9 third party cellular network is unavailable.
Need help?
Do you have a question about the GoSafe 2 and is the answer not in the manual?
Questions and answers