Related Manuals for ESI SOLUTION 2
Summary of Contents for ESI SOLUTION 2
- Page 1 Solution 2 ARTICULATING ARM and Model SOLUTION 2 KEYBOARD PLATFORM Model SOLUTION 2CC SOLUTION 2 Rev A 4/17 SOLUTION 2 SOLUTION 2CC INSTALLATION AND USE...
-
Page 2: Additional Tools Required
Contact your supplier if any operates to your satisfaction. Solution 2 combines the AA360 articulating arm with the PL003-25 keyboard platform. In this instruction booklet, installation of the two products will be explained in sequence, beginning with the AA360. - Page 3 SOLUTION 2 STEP 2: Attach Track • Drill " pilot holes through all 11 holes in the track. — Drill the holes " deep or Attach Through Rear Eight Holes Only 1" deep, depending on which wood screws will be used.
-
Page 4: Tools Required
SOLUTION 2 The keyboard platform for Solution 1 is PL003-25 (rectangle) or PL003-25CC (cut corners). Although the appearance varies, installation procedures are identical. PL003-25 PARTS PROVIDED Keyboard Platform (1) Palm Rest (1 or 2) 1 for Both Keying and Mousing... - Page 5 SOLUTION 2 STEP 6: Attach Keyboard Platform • Attach the keyboard platform to the keyboard arm and track assembly IMPORTANT: locked. Use a Phillips screwdriver. Flathead Screw Flange Flathead Screw Flange...
-
Page 6: Operation
• Unlock the quick release handle on the right side of the arm. • Adjust the tilt angle to the desired position. • Lock the quick release knob. 800.833.3746 esiergo.com © 2017 ESI Ergonomic Solutions. All rights reserved. SOLUTION 2 Rev A 4/17...