CNH FM-1000 Cabling Manual

CNH FM-1000 Cabling Manual

Integrated display
Hide thumbs Also See for FM-1000:
Table of Contents

Advertisement

CABLING GUIDE
FM-1000
Integrated Display
Version 1.00
Revision D
September 2010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FM-1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for CNH FM-1000

  • Page 1 CABLING GUIDE FM-1000 Integrated Display ™ Version 1.00 Revision D September 2010...
  • Page 2 Trimble, the Globe and Triangle logo, AgGPS, EZ-Boom, EZ-Guide, from you depending on the nature of the problem. EZ-Steer, FM-1000, and Tru Count Air Clutch are trademarks of Trimble Warranty Exclusions and Disclaimer Navigation Limited, registered in the United States and in other countries.
  • Page 3 Industry Canada Compliance Statement declare under sole responsibility that the product: This Class A digital apparatus meets the requirements of the Canadian FM-1000 complies with Part 15 Interference-Causing Equipment Regulations. of FCC Rules. Avis de conformité à la réglementation d'Industrie...
  • Page 4 FM-1000 Integrated Display Cabling Guide...
  • Page 5: Table Of Contents

    Standalone FM-1000 / RTK corrections ........
  • Page 6 Manual guidance FM-1000 / EZ-Boom ........
  • Page 7 FM-1000 / EZ-Remote joystick ........
  • Page 8 Contents FM-1000 Integrated Display Cabling Guide...
  • Page 9: Cable Configuration Guidelines

    C H A P T E R Cable Configuration Guidelines In this chapter: This chapter includes guidelines on cabling ® ™ options for the AgGPS FM-1000 integrated Multiple cables on single ports  display. Cable/port compatibility table  Superseded cables  FM-1000 Integrated Display Cabling Guide...
  • Page 10: Multiple Cables On Single Ports

    The Ag3000 modem can only be connected to port D. • When using yield monitoring with CAN, only connect to port A. • When using the LB25 lightbar and cable P/N 72420, you must use port B with internal • termination. FM-1000 Integrated Display Cabling Guide...
  • Page 11: Cable/Port Compatibility Table

    Cable Configuration Guidelines Cable/port compatibility table Use this table to confirm which FM-1000 integrated display cable can be used in each CAN port. Function Communication type Dedicated Port A Port B Port C Port D CAN port required? Autopilot RS232...
  • Page 12: Superseded Cables

    Cable Configuration Guidelines Superseded cables Cable updates since the previous FM-1000 integrated display release are as follows: Original part number Cable Replacement part number 65522 FM-1000 to NavController II cable with port 75741 replicator 67087 FM-1000 to CAN cable with port replicator...
  • Page 13: Connecting The Display Only

    C H A P T E R Connecting the Display Only In this chapter: The FM-1000 integrated display can operate as a standalone guidance system, or you can connect Standalone FM-1000 / WAAS /  it to a range of agricultural guidance devices to EGNOS / OmniSTAR XP/HP expand its functionality.
  • Page 14: Standalone Fm-1000 / Waas / Egnos / Omnistar Xp/Hp Corrections

    Connecting the Display Only Standalone FM-1000 / WAAS / EGNOS / OmniSTAR XP/HP corrections This figure shows how to connect the FM-1000 integrated display to use XP/HP corrections: Item Description Trimble part number FM-1000 integrated display 93100-01 FM-1000 power cable...
  • Page 15: Standalone Fm-1000 / Rtk Corrections

    Connecting the Display Only Standalone FM-1000 / RTK corrections This figure shows how to connect a standalone FM-1000 integrated display to use RTK corrections: Item Description Trimble part number FM-1000 integrated display 93100-02 FM-1000 power cable 66694 FM-1000 basic power cable...
  • Page 16 Connecting the Display Only FM-1000 Integrated Display Cabling Guide...
  • Page 17: Connecting To An Aggps Ez-Steer System

    C H A P T E R Connecting to an AgGPS EZ-Steer System In this chapter: This chapter describes how to connect the FM-1000 integrated display to an AgGPS FM-1000 / EZ-Steer / WAAS /  EZ-Steer system. EGNOS corrections using the...
  • Page 18: Fm-1000 / Ez-Steer / Waas / Egnos Corrections Using The Power Bus

    Note – To use the EZ-Guide ® 500 lightbar cable (P/N 62974) and instructions on how to repin the cable, see the support bulletin AgGPS FM-1000 - Modifying EZ-Steer Cable P/N 62974 For Use With FM-1000. FM-1000 Integrated Display Cabling Guide...
  • Page 19: Fm-1000 / Ez-Steer / Waas / Egnos Corrections With External Power Leads

    Note – To use the EZ-Guide 500 lightbar cable (P/N 62974) and instructions on how to repin the cable, see the support bulletin AgGPS FM-1000 - Modifying EZ-Steer Cable P/N 62974 For Use With FM-1000 FM-1000 Integrated Display Cabling Guide...
  • Page 20 Connecting to an AgGPS EZ-Steer System FM-1000 Integrated Display Cabling Guide...
  • Page 21: Connecting To An Aggps Autopilot System

    NavController II cable to the P4 or P12 FM-1000 / Autopilot / RTK  connector of the NavController II harness corrections will result in damage to the FM-1000 / FM-1000 with external switch /  FM-1000 integrated display, and will void Autopilot / RTK corrections the warranty.
  • Page 22: Fm-1000 / Autopilot / Waas /Egnos Corrections

    Connecting to an AgGPS Autopilot System FM-1000 / Autopilot / WAAS /EGNOS corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, to use the internal receiver: P3 / GPS connector CAUTION – Connecting the Port Replicator on the FM-1000 to NavController II cable...
  • Page 23: Fm-1000 / Autopilot / Omnistar Xp Or Hp Corrections

    Connecting to an AgGPS Autopilot System FM-1000 / Autopilot / OmniSTAR XP or HP corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, to use OmniSTAR XP/HP corrections: P3 / GPS connector CAUTION –...
  • Page 24: Fm-1000 / Autopilot / Rtk Corrections

    Connecting to an AgGPS Autopilot System FM-1000 / Autopilot / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, to use RTK corrections: P3 / GPS connector CAUTION – Connecting the Port Replicator on the FM-1000 to NavController II cable...
  • Page 25: Fm-1000 With External Switch / Autopilot / Rtk Corrections

    Connecting to an AgGPS Autopilot System FM-1000 with external switch / Autopilot / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system (controlled by an external switch), to use RTK corrections:...
  • Page 26 Connecting to an AgGPS Autopilot System Item Description Trimble part number External switch included with kit Part of P/N 67259 Main NavController II cable 54601 FM-1000 Integrated Display Cabling Guide...
  • Page 27: Fm-1000 With Ignition Sensing / Autopilot / Rtk Corrections

    Connecting to an AgGPS Autopilot System FM-1000 with ignition sensing / Autopilot / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system (with ignition sensing), to use RTK corrections: P3 / GPS connector CAUTION –...
  • Page 28: Fm-1000 / Autopilot / Trueguide Or Implement Monitoring

    Connecting to an AgGPS Autopilot System FM-1000 / Autopilot / TrueGuide or Implement Monitoring This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot ™ automated steering system, TrueGuide , or implement monitoring, to use RTK corrections:...
  • Page 29: M 900 Mhz Radio Antenna Kit 22882-10

    Connecting to an AgGPS Autopilot System Item Description Trimble part number 900 MHz radio antenna kit 22882-10 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 Main NavController II cable 54601 FM-1000 Integrated Display Cabling Guide...
  • Page 30: Fm-1000 / Autopilot / Trueguide Or Implement Monitoring With An Aggps 252/262 External Receiver

    FM-1000 / Autopilot / TrueGuide or Implement Monitoring with an AgGPS 252/262 external receiver This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system and TrueGuide system or implement monitoring, while using a second...
  • Page 31 Connecting to an AgGPS Autopilot System Item Description Trimble part number FM-1000 to TrueTracker cable 67092 Implement 10-pin data cable 0793-8740-450 Cable assembly, implement receiver extension 75447 AgGPS 252/262 receiver 55500-32 Main NavController II cable 54601 Sonalert 43104 FM-1000 Integrated Display Cabling Guide...
  • Page 32: Fm-1000 / Autopilot / Truetracker / Rtk Corrections

    Connecting to an AgGPS Autopilot System FM-1000 / Autopilot / TrueTracker / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system and TrueTracker implement steering system, to use RTK corrections:...
  • Page 33 Trimble part number 900 MHz radio antenna kit 22882-10 FM-1000 to TrueTracker cable 67092 Implement extension cable 0793-8740-450 FM-1000 to NavController II and TrueTracker main harness 67612 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 Sonalert...
  • Page 34: Fm-1000 / Autopilot / Aggps 252/262

    FM-1000/FM- 1000 integrated display, and will void the warranty. Note A – Connect only to port A or B on the FM-1000 integrated display. Note B – Connect only to port A on the receiver.
  • Page 35 Connecting to an AgGPS Autopilot System Item Description Trimble part number Main NavController II cable 54601 AgGPS 252/262 receiver 55500-32 FM-1000 Integrated Display Cabling Guide...
  • Page 36: Fm-1000 / Factory Ready Cnh Vehicle

    Connecting to an AgGPS Autopilot System FM-1000 / Factory ready CNH vehicle This figure shows how to connect the FM-1000 integrated display into a factory ready CNH vehicle, to use RTK corrections: CAUTION – Connecting the Port Replicator on the FM-1000 to NavController II cable...
  • Page 37: Fm-1000 / Autopilot / Factory Ready Cnh Vehicle / External Receiver

    Connecting to an AgGPS Autopilot System FM-1000 / Autopilot / Factory ready CNH vehicle / external receiver This figure shows how to connect the FM-1000 integrated display into a factory ready CNH vehicle, using the Autopilot system and an Ag25 external receiver: See note CAUTION –...
  • Page 38: Fm-1000 / Autopilot / Agco Wheeled Tractors

    Connecting to an AgGPS Autopilot System FM-1000 / Autopilot / AGCO Wheeled Tractors This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system to a Challenger MT500/600, an AGCO DT or RT series, or a Massey...
  • Page 39 Connecting to an AgGPS Autopilot System FM-1000 Integrated Display Cabling Guide...
  • Page 40 Connecting to an AgGPS Autopilot System FM-1000 Integrated Display Cabling Guide...
  • Page 41: Connecting The Field-Iq Crop Input Control System

    FM-1000 / Field-IQ cab kit /  connector of the NavController II harness Rawson PAR 40 will result in damage to the FM-1000 / FM-1000 / Autopilot / Field-IQ cab FM-1000 integrated display, and will void  kit / Rawson PAR 40 / RTK the warranty.
  • Page 42: Fm-1000 / Field-Iq Cab Kit / Powell Hitch Connector

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ cab kit / Powell hitch connector Connecting the FM-1000 integrated display with the Field-IQ cab kit, and a Powell hitch connector: To vehicle battery Optional: Connection NOT REQUIRED when relay cable P/N 77533 is not used.
  • Page 43: Fm-1000 / Field-Iq Cab Kit / Powell Hitch Connector / Power Relay

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ cab kit / Powell hitch connector / power relay Connecting the FM-1000 integrated display, Field-IQ cab kit, power relay, and Powell hitch connector: To vehicle battery To vehicle battery To implement...
  • Page 44 Connecting the Field-IQ Crop Input Control System Item Description Trimble part number Dual relay power cutoff cable 77533 Power to cab cable 76941 FM-1000 Integrated Display Cabling Guide...
  • Page 45: Field-Iq / Rawson Par 2 Drives / Tru Count Air Clutch

    Rawson motor CPC to DTM cable 75531 Rawson control module 75070-00 Rawson PAR 2 motor 300499 CAN-T Magnus cable 75524 Switching module to valve module cable 76859 Switch control module 75774-05 Tru Count module 68355-00 FM-1000 Integrated Display Cabling Guide...
  • Page 46: Fm-1000 / Field-Iq Cab Kit / Rawson Par 40

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ cab kit / Rawson PAR 40 ™ Connecting the FM-1000 integrated display with the Field-IQ cab kit and the Rawson PAR 40 motor: Item Description Trimble part number FM-1000 integrated display...
  • Page 47 Connecting the Field-IQ Crop Input Control System Item Description Trimble part number FM-1000 integrated display to Field-IQ cable 75834 CAN to power extension cable 75528-xx Rawson module Tee cable 75527 Implement terminator kit (includes 75491) 75529 Rawson control module 75070-00...
  • Page 48: Fm-1000 / Autopilot / Field-Iq Cab Kit / Rawson Par 40 / Rtk Corrections

    Connecting the Field-IQ Crop Input Control System FM-1000 / Autopilot / Field-IQ cab kit / Rawson PAR 40 / RTK Corrections This figure shows how to connect the FM-1000 integrated display with the Autopilot system, the ™ Field-IQ cab kit and the Rawson PAR 40 motor, using RTK corrections: CAUTION –...
  • Page 49 Connecting the Field-IQ Crop Input Control System Item Description Trimble part number 67259 FM-1000 power cable with relay and switch (power bus) 67258 Basic power cable Power to cab cable 76941 77368 Cab to hitch CAN cable Remote foot switch (optional)
  • Page 50: Fm-1000 / Field-Iq Rate And Section Control To Raven 4X0 Or Aggps Ez-Boom Harness

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ Rate and Section control to Raven 4x0 or AgGPS EZ-Boom harness Connecting the FM-1000 integrated display with Field-IQ Rate and Section Control and the Raven 4x0 or AgGPS EZ-Boom cables: Item...
  • Page 51: Fm-1000 / Field-Iq Section Control Only To The Raven 4X0

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ Section Control only to the Raven 4x0 This figure shows how to connect the FM-1000 integrated display with Field-IQ Section Control only to the Raven 4x0 controller: Item Description Trimble part number...
  • Page 52: Fm-1000 / Field-Iq Section Control To Raven 4X00

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ Section Control to Raven 4x00 Connecting the FM-1000 integrated display with Field-IQ Section Control to the Raven 4x00 controller: Item Description Trimble part number FM-1000 integrated display 93100-01 FM-1000 power cable...
  • Page 53: Fm-1000 / Field-Iq Rate And Section Control To Raven 4X00

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ Rate and Section Control to Raven 4x00 Connecting the FM-1000 integrated display with Field-IQ Rate and Section Control and the Raven 4x00 cables Item Description Trimble part number FM-1000 integrated display...
  • Page 54: Fm-1000 / Field-Iq Rate And Section Control For Caseih Spx (2009 And Later) Sprayers

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ Rate and Section Control for CaseIH SPX (2009 and later) sprayers Connecting the FM-1000 integrated display with Field-IQ Rate and Section Control for Case IH SPX sprayers (2009 or later): Item...
  • Page 55 Connecting the Field-IQ Crop Input Control System Item Description Trimble part number Signal input module 76774-00 80099 Field-IQ-to-sprayer cab cable Field-IQ SPX switch input cable (2009 and later) 80254 80250 Field-IQ SPX chassis harness cable (2009 and later) FM-1000 Integrated Display Cabling Guide...
  • Page 56: Fm-1000 / Field-Iq Rate And Section Control To Agco Rogator (2007 And Later)

    Connecting the Field-IQ Crop Input Control System FM-1000 / Field-IQ Rate and Section Control to AGCO RoGator (2007 and later) Connecting the FM-1000 integrated display, Field-IQ Rate and Section Control and AGCO RoGator: To battery To boom switches To power...
  • Page 57: Fm-1000 / Field-Iq Cab Kit / Nh3 And Liquid Application Full Harness

    FM-1000 / Field-IQ cab kit / NH3 and liquid application full harness Connecting the FM-1000 integrated display to the Field-IQ cab kit and the Rate and Section Control module with full NH3/liquid harness: Diagram of Field-IQ™ System, Full Harness for Sprayers...
  • Page 58: Rate And Section Control Module

    80584 - Field-IQ to Dickey-john encoder/flowmeter 80539 Pressure sensor cable (left to right): - Field-IQ to Dickey-john pressure sensor adapter 80575 - Field-IQ to Raven pressure sensor adapter 80583 - Trimble pressure sensor adapter 54618 FM-1000 Integrated Display Cabling Guide...
  • Page 59: Fm-1000 / Autopilot / Field-Iq Cab Kit / Spreader

    Connecting the Field-IQ Crop Input Control System FM-1000 / Autopilot / Field-IQ cab kit / Spreader Connecting the FM-1000 integrated display, Field-IQ cab kit and the Rate and Section Control Module for spreader applications: Necessary components to replicate spreader Item...
  • Page 60 Connecting the Field-IQ Crop Input Control System Item Description Trimble part number Field-IQ to Dickey-john encoder/flowmeter 80539 Field-IQ, spreader gate height and spinner speed adapter cable 80507 FM-1000 Integrated Display Cabling Guide...
  • Page 61: Connecting Greenseeker

    C H A P T E R Connecting GreenSeeker FM-1000 / GreenSeekerFM-1000 / This chapter shows how to connect the FM-1000  ® GreenSeeker integrated display to the GreenSeeker variable rate application and mapping system. FM-1000 Integrated Display Cabling Guide...
  • Page 62: Fm-1000 / Greenseeker

    Connecting GreenSeeker FM-1000 / GreenSeeker This figure shows how to connect the FM-1000 integrated display with the GreenSeeker system, while using WAAS or EGNOS corrections. Power switch Power switch Power switch Power switch GreenSeeker sensor GreenSeeker sensor Item Description Trimble part number...
  • Page 63: Connecting To An Ez-Boom System

    FM-1000 / Autopilot / EZ-Boom /  connector of the NavController II harness TrueTracker / RTK corrections will result in damage to the FM-1000 / FM-1000 / EZ-Boom / EZ-Steer /  FM-1000 integrated display, and will void RTK corrections / power bus the warranty.
  • Page 64: Manual Guidance Fm-1000 / Ez-Boom

    Connecting to an EZ-Boom System Manual guidance FM-1000 / EZ-Boom This figure shows how to connect the FM-1000 integrated display with the AgGPS EZ-Boom automated application control system, while using manual guidance: Item Description Trimble part number FM-1000 integrated display...
  • Page 65: Fm-1000 / Autopilot / Ez-Boom / Rtk Corrections

    Connecting to an EZ-Boom System FM-1000 / Autopilot / EZ-Boom / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system and the AgGPS EZ-Boom automated application control system, to use...
  • Page 66 Connecting to an EZ-Boom System Item Description Trimble part number EZ-Boom 2010 to FMD and EZ-Guide 500 cable 61437 CAN terminator 59783 EZ-Boom controller 59898-00 Main NavController II cable 54601 FM-1000 Integrated Display Cabling Guide...
  • Page 67: Fm-1000 / Autopilot / Ez-Boom / Truetracker / Rtk Corrections

    Connecting to an EZ-Boom System FM-1000 / Autopilot / EZ-Boom / TrueTracker / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system and TrueTracker and EZ-Boom systems, while using RTK corrections:...
  • Page 68 900 MHz radio antenna kit 22882-10 FM-1000 to TrueTracker cable 67092 Implement extension cable 0793-8740-450 FM-1000 to NavController II and TrueTracker main harness 67612 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 FM-1000 to CAN cable with port replicator...
  • Page 69: Fm-1000 / Ez-Boom / Ez-Steer / Rtk Corrections / Power Bus

    Connecting to an EZ-Boom System FM-1000 / EZ-Boom / EZ-Steer / RTK corrections / power bus This figure shows how to connect the FM-1000 integrated display with the EZ-Steer and EZ-Boom systems to use RTK corrections: Item Description Trimble part number...
  • Page 70 Note – To use the EZ-Guide 500 lightbar cable (P/N 62974) and instructions on how to repin the cable, see the support bulletin AgGPS FM-1000 - Modifying EZ-Steer Cable P/N 62974 For Use With FM-1000. FM-1000 Integrated Display Cabling Guide...
  • Page 71: Fm-1000 / Ez-Boom / Ez-Steer / Rtk Corrections / External Power Leads

    Connecting to an EZ-Boom System FM-1000 / EZ-Boom / EZ-Steer / RTK corrections / external power leads This figure shows how to connect the FM-1000 integrated display with the EZ-Boom and EZ-Steer systems with external power leads to use RTK corrections: Item...
  • Page 72 Note – To use the EZ-Guide 500 lightbar cable (P/N 62974) and instructions on how to repin the cable, see the support bulletin AgGPS FM-1000 - Modifying EZ-Steer Cable P/N 62974 For Use With FM-1000. FM-1000 Integrated Display Cabling Guide...
  • Page 73: Connecting To Radar Output And Serial Control

    NavController II cable to the P4 or P12 connector of the NavController II harness FM-1000 / Autopilot / radar  will result in damage to the FM-1000 / output / serial variable rate FM-1000 integrated display, and will void FM-1000 / Autopilot / serial ...
  • Page 74: Fm-1000 / Autopilot / Radar Output / Serial Variable Rate For Raven Scs400 Or Scs600

    FM-1000 / Autopilot / radar output / serial variable rate for Raven SCS400 or SCS600 This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, radar output, and serial variable rate for Raven SCS400 or SCS600:...
  • Page 75 Connecting to Radar Output and Serial Control Item Description Trimble part number FM-1000 to DE9, RS232 67091 FM-1000 / FM-1000 / EZ-Guide 500 to Raven variable rate adaptor 69729 Cable, radar speed output, Raven 64272 FM-1000 Integrated Display Cabling Guide...
  • Page 76: Fm-1000 / Autopilot / Radar Output / Serial Variable Rate For Rawson

    Connecting to Radar Output and Serial Control FM-1000 / Autopilot / radar output / serial variable rate for Rawson This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, radar output, and serial variable rate for Rawson systems: P3/GPS connector CAUTION –...
  • Page 77 Connecting to Radar Output and Serial Control Item Description Trimble part number FM-1000 universal radar adaptor 68461 FM-1000 to DE9, RS232 67091 FM-1000 / FM-1000 / EZ-Guide 500 to Rawson variable rate adaptor 69730 Rawson radar speed output cable 64273 FM-1000 Integrated Display Cabling Guide...
  • Page 78: Fm-1000 / Autopilot / Radar Output / Serial Variable Rate

    Connecting to Radar Output and Serial Control FM-1000 / Autopilot / radar output / serial variable rate This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, radar output, and serial variable rate for a range of third-party systems:...
  • Page 79 Description Trimble part number Ag25 GNSS antenna 77038-00 Main NavController II cable 54601 FM-1000 universal radar adaptor 68461 FM-1000 to DE9, RS232 67091 Cable, radar speed output, DICKEY-john 64273 Cable, radar speed output, Hiniker 64274 FM-1000 Integrated Display Cabling Guide...
  • Page 80: Fm-1000 / Autopilot / Serial Connection For Hardi 5500 Controller

    FM-1000/FM- 1000 integrated display, and will void the warranty. Note – For the Hardi 5500 controller to work with the FM-1000 integrated display, it must have firmware version 3.16 or greater installed and have a JOBCOM control box connected.
  • Page 81 Connecting to Radar Output and Serial Control Item Description Trimble part number FM-1000 to DE9, RS232 67091 DB9(F) to DB9(F) null modem cable 59043 FM-1000 Integrated Display Cabling Guide...
  • Page 82 Connecting to Radar Output and Serial Control FM-1000 Integrated Display Cabling Guide...
  • Page 83: Connecting To A Tru Application Control System

    NavController II cable to the P4 or P12 connector of the NavController II harness FM-1000 / Autopilot / Tru  will result in damage to the FM-1000 / Application Control / TrueTracker FM-1000 integrated display, and will void / RTK corrections the warranty.
  • Page 84: Manual Guidance Fm-1000 / Tru Application Control

    Connecting to a Tru Application Control System Manual guidance FM-1000 / Tru Application Control This figure shows how to connect the FM-1000 integrated display with the Tru Application Control system, while using manual guidance: Item Description Trimble part number FM-1000 integrated display...
  • Page 85: Fm-1000 / Autopilot / Tru Application Control / Rtk Corrections

    Connecting to a Tru Application Control System FM-1000 / Autopilot / Tru Application Control / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system and the Tru Application Control system, to use RTK corrections:...
  • Page 86 Connecting to a Tru Application Control System Item Description Trimble part number Tru Application Control cab harness cable 64909 Main NavController II cable 54601 FM-1000 Integrated Display Cabling Guide...
  • Page 87: Fm-1000 / Autopilot / Tru Application Control / Truetracker / Rtk Corrections

    FM-1000 / Autopilot / Tru Application Control / TrueTracker / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, Tru Application Control, and TrueTracker, to use RTK corrections: See note...
  • Page 88 900 MHz radio antenna kit 22882-10 FM-1000 to TrueTracker cable 67092 Implement 10-pin data cable 0793-8740-450 FM-1000 to NavController II and TrueTracker main harness 67612 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 FM-1000 to CAN cable with port replicator...
  • Page 89: Connecting External Receivers, Radios, And Modems

    NavController II cable to the P4 or P12 connector of the NavController II harness FM-1000 / Autopilot / External  will result in damage to the FM-1000 / receiver for Implement FM-1000 integrated display, and will void Monitoring, TrueGuide, or the warranty.
  • Page 90: Fm-1000 / Autopilot / Aggps 252/262

    Connecting External Receivers, Radios, and Modems FM-1000 / Autopilot / AgGPS 252/262 This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, while using an AgGPS 252 or an AgGPS 262 receiver: See note B...
  • Page 91 Connecting External Receivers, Radios, and Modems Item Description Trimble part number Main NavController II cable 54601 AgGPS 252/262 receiver 55500-32 FM-1000 Integrated Display Cabling Guide...
  • Page 92: Fm-1000 / Trueguide Or Implement Monitoring With An Aggps 252/262 External Receiver

    FM-1000 / TrueGuide or Implement Monitoring with an AgGPS 252/262 external receiver This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system and TrueGuide system, while using a second external receiver with RTK...
  • Page 93 Connecting External Receivers, Radios, and Modems Item Description Trimble part number FM-1000 to TrueTracker cable 67092 Implement extension cable 0793-8740-450 Cable assembly, implement receiver extension 75447 AgGPS 252/262 receiver 55500-xx Main NavController II cable 54601 Sonalert 43104 FM-1000 Integrated Display Cabling Guide...
  • Page 94: Fm-1000 / Autopilot / External Receiver For Implement Monitoring, Trueguide

    FM-1000 / Autopilot / External receiver for Implement Monitoring, TrueGuide, or FieldLevel II This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, and external receivers (such as an Ag332 or Ag442), for use with implement monitoring, TrueGuide, or Field Level II.
  • Page 95 22882-10 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 Main NavController II cable 54601 FM-1000 to external receiver adaptor cable 71453 AgGPS 442 receiver cable 62037 AgGPS 442 receiver Zephyr model 2 antenna 57970-00...
  • Page 96: Fm-1000 / Autopilot / Ag3000 Vrs Corrections

    Connecting External Receivers, Radios, and Modems FM-1000 / Autopilot / Ag3000 VRS corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot Automated Steering System while using corrections from the Ag3000 modem. P3 / GPS connector Note: TruTracker not available with this configuration CAUTION –...
  • Page 97 Connecting External Receivers, Radios, and Modems Item Description Trimble part number Ag3000 break-out cable 70433 Ag3000 modem 80300 FM-1000 Integrated Display Cabling Guide...
  • Page 98: Fm-1000 / Autopilot / Sierra Wireless Modem

    Connecting External Receivers, Radios, and Modems FM-1000 / Autopilot / Sierra wireless modem Connecting the FM-1000 integrated display with the AgGPS Autopilot Automated Steering System and the Sierra wireless modem: CAUTION – Connecting the Port Replicator on the CFX-750 display to NavController II cable...
  • Page 99 Connecting External Receivers, Radios, and Modems Item Description Trimble part number Main NavController II cable 54601 Sierra Wireless Modem kit: 71116-xx • Antenna • Mag mount base • USB cable Note – Part number dependant on wireless provider. FM-1000 Integrated Display Cabling Guide...
  • Page 100 Connecting External Receivers, Radios, and Modems 1 0 0 FM-1000 Integrated Display Cabling Guide...
  • Page 101: Connecting Yield Monitoring

    Replicator on the FM-1000 to NavController II cable to the P4 or P12 connector of the NavController II harness will result in damage to the FM-1000 / FM-1000 integrated display, and will void the warranty. FM-1000 Integrated Display Cabling Guide...
  • Page 102: Fm-1000 / Agleader Ym2000 Yield Monitor

    Connecting Yield Monitoring FM-1000 / AgLeader YM2000 yield monitor This figure shows how to connect the FM-1000 integrated display to the AgLeader YM 2000 yield monitoring system: Item Description Trimble part number FM-1000 integrated display 93100-01 FM-1000 power cable 66694...
  • Page 103: Fm-1000 / John Deere 9X60 / 9X70 Yield Monitor

    This figure shows how to connect the FM-1000 integrated display to the John Deere 9x60 or 9x70 yield monitoring system: Note – Connect only to port A on the FM-1000 integrated display; when using yield monitoring do not connect another CAN device to the occupied port.
  • Page 104 Connecting Yield Monitoring 1 0 4 FM-1000 Integrated Display Cabling Guide...
  • Page 105: Connecting To A Fieldlevel Ii System

    C H A P T E R Connecting to a FieldLevel II System In this chapter: This chapter shows the different ways to connect the FM-1000 integrated display to a FieldLevel II FM-1000 / Autopilot / FieldLevel II  system.
  • Page 106: Fm-1000 / Autopilot / Fieldlevel Ii / Agco Challenger Mt / Rtk Corrections

    FM-1000 / Autopilot / FieldLevel II / AGCO Challenger MT / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, and the AgGPS FieldLevel II system on AGCO Challenger MT tractors:...
  • Page 107 900 MHz radio antenna kit 22882-10 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 FM-1000 to CAN cable with port replicator 75407 Challenger MT CAN interface - FieldLevel II 62108 Mast MM2E-T GPS mount...
  • Page 108: Fm-1000 / Autopilot / Fieldlevel Ii / Cnh Direct Connect / Rtk Corrections

    FM-1000 / Autopilot / FieldLevel II / CNH direct connect / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, and the FieldLevel II system on CNH direct-connect machines: P3 / GPS connector CAUTION –...
  • Page 109 900 MHz radio antenna kit 22882-10 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 FM-1000 to CAN cable with port replicator 75407 CAN to VM and FieldLevel II cable 62039 CAN terminator 59783 Direct connect valve module, FRU...
  • Page 110: Fm-1000 / Autopilot / Fieldlevel Ii / John Deere Direct-Connect / Rtk Corrections

    FM-1000 / Autopilot / FieldLevel II / John Deere direct-connect / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, and the FieldLevel II system on John Deere direct-connect machines:...
  • Page 111 900 MHz radio antenna kit 22882-10 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 FM-1000 to CAN cable with port replicator 75407 CAN to VM and FieldLevel II cable 62039 CAN terminator 59783 Direct connect valve module...
  • Page 112: Fm-1000 / Autopilot / Fieldlevel Ii / Proportional Valve / Rtk Corrections

    FM-1000 / Autopilot / FieldLevel II / Proportional valve / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, and the FieldLevel II system on proportional valve machines: P3 / GPS connector CAUTION –...
  • Page 113 62120 900 MHz radio antenna kit 22882-10 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 FM-1000 to CAN cable with port replicator 75407 FieldLevel II VM410/420 cable 62767 CAN terminator 59783 GCS400 valve module...
  • Page 114: Fm-1000 / Autopilot / Fieldlevel Ii / Pt Valve / Rtk Corrections

    Connecting to a FieldLevel II System FM-1000 / Autopilot / FieldLevel II / PT valve / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, and the FieldLevel II system on PT valve machines:...
  • Page 115 Trimble part number 900 MHz radio antenna kit 22882-10 Coaxial 160" N/f + TNC/m-ra cable 68295 Coaxial 480" N/m + TNC/m-ra cable 67472 FM-1000 to CAN cable with port replicator 75407 FieldLevel II VM410/420 cable 62767 CAN terminator 59783 PWM valve module...
  • Page 116: Fm-1000 / Fieldlevel Ii / Tandem Or Dual Antenna / Rtk Corrections

    Connecting to a FieldLevel II System FM-1000 / FieldLevel II / Tandem or dual antenna / RTK corrections This figure shows how to connect the FM-1000 integrated display with tandem or dual antenna: See note Item 3 optional Connect to direct-connect cable or valve module Note –...
  • Page 117 Connecting to a FieldLevel II System Item Description Trimble part number NMO to TNC 20ft antenna cable and base 62120 900 MHz radio antenna kit 22882-10 FM-1000 Integrated Display Cabling Guide...
  • Page 118: Fm-1000 / Autopilot / Aggps 252/262 / Fieldlevel Ii / Tandem Or Dual Antenna / Rtk Corrections

    FM-1000 / Autopilot / AgGPS 252/262 / FieldLevel II / Tandem or dual antenna / RTK corrections This figure shows how to connect the FM-1000 integrated display to the Autopilot system, an AgGPS 252/262 external receiver, with tandem or dual antenna:...
  • Page 119 Mast (x2) MM2E-T GPS mount (x2) 0367-3440 Ag25 GNSS antenna (x2) 77038-00 FM-1000 to NavController II cable with port replicator 75741 Cable assembly, 8-pin to 12-pin adaptor 76442 2 pin DTM to 2 pin DT power adaptor 67095 Main NavController II cable...
  • Page 120: Fm-1000 / Fieldlevel Ii / Without Power Bus

    Connecting to a FieldLevel II System FM-1000 / FieldLevel II / Without power bus This figure shows how to connect the FM-1000 integrated display with the FieldLevel II system without utilizing the power bus; several vehicle options are shown: To PT valve...
  • Page 121 VM415 dual case direct cable AG VM415 FRU direct connect valve module AG 57765-070 John Deere VM415 valve cable AG 0793-1030-120 John Deere wiring harness cable 62108 Challenger MT CAN interface to Autopilot system cable FM-1000 Integrated Display Cabling Guide...
  • Page 122 Connecting to a FieldLevel II System 1 2 2 FM-1000 Integrated Display Cabling Guide...
  • Page 123: Installing Accessories

    NavController II cable to the P4 or P12 connector of the NavController II harness FM-1000 / Autopilot / EZ-Boom /  will result in damage to the FM-1000 / Remote-mounted LB25 external FM-1000 integrated display, and will void lightbar (option 2) the warranty.
  • Page 124: Fm-1000 / 4 Agcam Cameras / Autopilot / Rtk Corrections

    Installing Accessories FM-1000 / 4 AgCam cameras / Autopilot / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system and 4 AgCam cameras, while using RTK corrections: P3 / GPS connector CAUTION –...
  • Page 125 Installing Accessories Item Description Trimble part number FM-1000 AgCam stainless steel camera kit (up to 4 units) 77400-10 FM-1000 AgCam aluminium camera kit (up to 4 units) 77400-20 Main NavController II cable 54601 FM-1000 Integrated Display Cabling Guide...
  • Page 126: Fm-1000 / Autopilot / Ez-Boom / Display-Mounted Lb25 External Lightbar (Option 1)

    FM-1000 / Autopilot / EZ-Boom / Display-mounted LB25 external lightbar (option 1) This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, the AgGPS EZ-Boom automated application control system, and the display-mounted LB25 external lightbar with RTK corrections:...
  • Page 127 Ag25 GNSS antenna 77038-00 NMO to TNC 20ft antenna cable and base 62120 900 MHz radio antenna kit 22882-10 FM-1000 to CAN cable with port replicator 75407 EZ-Boom 2010 to FMD and EZ-Guide 500 cable 61437 CAN terminator 59783 EZ-Boom controller...
  • Page 128: Fm-1000 / Autopilot / Ez-Boom / Remote-Mounted Lb25 External Lightbar (Option 2)

    FM-1000 / Autopilot / EZ-Boom / Remote-mounted LB25 external lightbar (option 2) This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, the AgGPS EZ-Boom automated application control system, and the remotely-mounted LB25 external lightbar, to use RTK corrections:...
  • Page 129 Description Trimble part number NMO to TNC 20ft antenna cable and base 62120 900 MHz radio antenna kit 22882-10 FM-1000 to CAN cable with port replicator 75407 EZ-Boom 2010 to FMD and EZ-Guide 500 cable 61437 CAN terminator 59783 EZ-Boom controller...
  • Page 130: Fm-1000 / Autopilot / Ez-Boom / Multiple Lb25 External Lightbars / Rtk Corrections

    FM-1000 / Autopilot / EZ-Boom / multiple LB25 external lightbars / RTK corrections This figure shows how to connect the FM-1000 integrated display with the AgGPS Autopilot automated steering system, the AgGPS EZ-Boom automated application control system, and multiple LB25 external lightbar, while using RTK corrections:...
  • Page 131 Installing Accessories Item Description Trimble part number 900 MHz radio antenna kit 22882-10 FM-1000 to CAN cable with port replicator 75407 EZ-Boom 2010 to FMD and EZ-Guide 500 cable 61437 CAN terminator 59783 EZ-Boom controller 59898-00 Main NavController II cable...
  • Page 132: Fm-1000 / Ez-Remote Joystick

    Installing Accessories FM-1000 / EZ-Remote joystick Connecting the FM-1000 integrated display to the EZ-Remote joystick: Item Description Trimble part number FM-1000 integrated display 93100-01 EZ-Remote joystick 83200-00 72420 FM-1000 to CAN cable 72422 Splitter, RJ11 F to 2x RJ11 F...

Table of Contents

Save PDF