Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Hurricane ALT55
- Page 1 INSTRUCTIONS MANUAL ALT55 DUST EXTRACTOR...
- Page 2 Notice! 1.These instructions are only for HURRICANE ALT55 Dust Extractors. 2. The ALT55 Dust Extractors are designed to clean construction areas and be connected to medium and big grinders. This machine can only be used with dry, non-explosive material. 3. Please pay particular attention to the safety regulations and safety instructions 4.
-
Page 3: Table Of Contents
..............................11.ALT55 Dust extractor Diagram and Parts: 12.Contact information... - Page 4 1.Unpacking Unpacking the device. Dispose of the packing materials in compliance with the laws in force. Please check that the following accessories are included: Inlet adapter Hose with both end hose-cuff If any of the above-mentioned parts are missing, please contact your local distributor. 2.SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following:...
-
Page 5: Function
Failure to follow this warning label may result in fire,electric shock or injury 3.Function ALT55 equipped with a three phase powerful turbine motor. The machine has three HEPA filters inside, is for sucking and separating dry, non-combustible dust with an explosion limit value of 0.1mg/m3 The m otor is started by switches. -
Page 6: Filter Cleaning
separated out, partly by centrifugal force and partly by gravity. Air and finer particles then pass through the filter system where they are separated. The separated dust accumulates in the cyclone until the machine is switched off, when it drops through the bottom flap into the plastic bag. -
Page 7: Maintenance
All dust extractors can be used with original HURRICANE dust bags for single use. Also all models can be fitted with the longopac system. Only change Longopac or regular bag after filter cleaning cycle have been completed. -
Page 8: Problem Solving
9.Problem solving The dust extractors are designed and manufactured for severe environments and tasks, but the user must note that the machine must be protected from knocks and blows. Filter, seals, attachments, and connections are carefully adapted and selected with regard to the operator’s work environment. -
Page 9: Technical Data
10.Technical data ALT54 ALT55 ALT56 ALT57 ALT58 Model Motor(kw) Voltage(V/Hz) 380/50 380/50 480/60 380/50 480/60 Max Vacuum(mbar) Max air-flow( m3/h) Inlet(mm) Filter area(m2) Filter capacity 0.3μm, efficency>99% Dimension(L*W*H) 680*1070*1540 mm Weight(kg) -
Page 10: Alt55 Dust Extractor Diagram And Parts
11.ALT55 Dust extractor Diagram and Parts: Air compressor Sturdy frame Three phase turbine motor Electrical connector 8" inch rear wheels. 4" lockable front swivel casters. Drop-down poly-bag disposal, Longopac compatible. Flap Assembly kit. Powder coated stainless steel barrel 10 Dust Suction Connection (inlet) / 3" Die-casting Inlet... -
Page 11: Contact Information
NOTERINGAR/NOTES:________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________...
Need help?
Do you have a question about the ALT55 and is the answer not in the manual?
Questions and answers