Initial Settings; Setting The Date And Time - Traveler FX 5 User Manual

GETTING STARTED

Initial Settings

The language & date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an extended
period of time.
1. Press the ON/OFF button to turn the power on.
2. Press any button to enter language setup. Select the displayed language with the
/ / / buttons and press the SET button.
3. Select the date format with the
4. Select the item's field with the
time with the
5. After confirming all settings are correct, press the SET button.
Half press the shutter button or press the MENU button will enter capture mode
without saving the settings.

Setting the Date and Time

When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Toggle the
x button.
2. Press the MENU button.
3. Select [Setup] with the
4. Select [Date/Time] with the
press the SET button.
5. Select the date format with the
and press the SET button.
Select the item's field with the
adjust the value for the date and time with the
/ buttons.
After confirming all settings are correct, press
press the SET button.
6. To exit from the [Setup] menu, press the
button.
Helpline No. UK/Ireland 00800/7877 2368
12
Web Support www.Traveler-service.com/uk
Model Number: FX 5
/
/
/ buttons.
button to [8] or [w]; or press the
button.
/ buttons, and
/
/
buttons, and press the SET button.
buttons and adjust the value for the date and
buttons,
buttons and
MENU
4