Table of Contents
Advertisement
Operating the appliance
en
p Easy Iron
A special operation using reduced spin
speed followed by fluffing to help
reduce creasing.
Touch p Easy Iron to activate or
deactivate it.
If p Easy Iron has been
Note:
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
G SpeedPerfect
Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch G SpeedPerfect to activate or
deactivate it.
With the G SpeedPerfect
Note:
additional programme setting activated,
the maximum load of washing will be
reduced.
1
Operating the
appliance
P reparing the appliance
O p e r a t i n g t h e a p p l i a n c e
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Û Drum Clean programme.
~ "Before washing for the first time"
on page 19
Notes
Never switch on a damaged
■
appliance!
Inform customer service!
■
32
Insert mains plug.
1.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Turn the water tap on.
2.
Open the appliance door.
3.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a programme.
Use the programme selector to select
the required programme. The
programme selector can be rotated in
either direction.
The appliance is switched on.
Hide quick links:
Advertisement
Table of Contents
