Table of Contents
Advertisement
18" Electric Start
Lawn Mower
VS600e
User Manual
[Revision 3.0 February 2020]
READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND
MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in
appearance, assembly, inclusions, specifications, description and packaging.
The product is NOT supplied with engine oil, although traces of oil from the manufacturing process may be present. It is essential to
add adequate engine oil of the correct type to the engine before use.
Failure to add engine oil will void the product
warranty.
E&OE
© 2020 Power Blade
Advertisement
Table of Contents
Related Manuals for Powerblade VS600e
Summary of Contents for Powerblade VS600e
- Page 1 18" Electric Start Lawn Mower VS600e User Manual [Revision 3.0 February 2020] READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.
-
Page 2: Safety
18" Electric Start Lawn Mower - VS600e Safety Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or equipment or property damage if not understood or followed. Safety messages have the following symbols:... - Page 3 18" Electric Start Lawn Mower - VS600e General Electrical Safety General Electrical Safety General Service Information • Inspect electrical equipment, extension • Electrically grounded equipment must have • The equipment must be serviced or cords, power bars, and electrical fittings for...
- Page 4 18" Electric Start Lawn Mower - VS600e • Do not change the engine governor settings or over speed the engine; • Disengage all blade and drive clutches before starting the engine; • Start the engine or switch on the motor carefully according to instructions and with feet well away from the blade(s);...
- Page 5 18" Electric Start Lawn Mower - VS600e • Do not throw the battery on a fire, and do not expose the battery to water. • Do not place the battery core under direct sunlight, which may cause the core to produce heat, smoke, fire, and can also cause bad performance and shorten the service life.
-
Page 6: Safety Symbols
18" Electric Start Lawn Mower - VS600e Safety Symbols The product may have safety warning labels attached to it, explained below. Understand the symbols on your product and their meanings. If any stickers become unreadable, unattached etc., replace them. Read User Manual... - Page 7 18" Electric Start Lawn Mower - VS600e Carbon-Monoxide Hazard Pull Hazard Slope / Fall Injury Hazard "Slam Dunk" Warning Do not use the product in Be aware that the product Be aware that using the product Do NOT attempt "slam dunk"...
-
Page 8: Table Of Contents
18" Electric Start Lawn Mower - VS600e Table of Contents Safety ................................2 Safety Symbols ................................6 Parts Identification ............................. 10 Assembly ..............................11 Assembling the Handle ............................. 11 Fixing the Connection Cord ............................12 Assembling the Grass Catcher ..........................12 Assembling the Grass Catcher to the Mower ...................... - Page 9 18" Electric Start Lawn Mower - VS600e Maintenance Schedule ............................. 29 Transport .................................. 29 Troubleshooting ............................30 Specifications ............................. 31 E&OE © 2020 Power Blade...
-
Page 10: Parts Identification
18" Electric Start Lawn Mower - VS600e Parts Identification Name Name Drive lever (clutch lever) Rear wheel Soft grip Engine oil cap Upper handle Side discharge cover Brake lever /stop lever Side discharge chute Fixing knob with square neck bolt... -
Page 11: Assembly
18" Electric Start Lawn Mower - VS600e Assembly Assembling the Handle 1. Fasten the lower handle to the device by using two bolts and two small knobs on each side. 2. Unfold the upper handle and fix it to lower handle by using the big knobs and the bolts on each side. -
Page 12: Fixing The Connection Cord
18" Electric Start Lawn Mower - VS600e Fixing the Connection Cord Fix the connection cord to the handle with the cord clips (supplied). Assembling the Grass Catcher Clip the plastic clips over the metal frame. Make sure that these clips are fully secured to the metal frame. -
Page 13: Assembling The Grass Catcher To The Mower
18" Electric Start Lawn Mower - VS600e Assembling the Grass Catcher to the Mower 1. Lift the rear discharge cover with one hand and hook in the grass catcher. 2. Release the rear discharge cover to secure the grass catcher in position. -
Page 14: Assembling The Side Discharge Chute
18" Electric Start Lawn Mower - VS600e Assembling the Side Discharge Chute NOTE: When you’re going to use the side discharge function, you first need to remove the grass catcher and plug-in the mulching plug. 1. As shown in the images above, lift the side discharge cover with one hand and hook in the side discharge duct with the other hand. -
Page 15: Checking The Engine Oil Level And Filling With Engine Oil
18" Electric Start Lawn Mower - VS600e Checking the Engine Oil Level and Filling with Engine Oil CAUTION! The following procedures and adjustments must be performed before the engine is started. • Do not attempt to make any of these adjustments while the engine is running. • To prevent engine damage, the engine is shipped without oil or petrol. -
Page 16: Filling With Engine Fuel
18" Electric Start Lawn Mower - VS600e Filling with Engine Fuel CAUTION! • Always use clean, fresh unleaded petrol. Purchase fuel in quantities that can be used within 30 days. Never mix oil with petrol. • Do not fill into the base of neck to allow for fuel expansion. -
Page 17: Adjustments
18" Electric Start Lawn Mower - VS600e Adjustments Setting the Cutting Height CAUTION! Adjust the cutting height only when the engine is switch OFF and the spark plug boot has been pulled out. The cutting height is centrally adjusted with the cutting height adjusting handle. Different cutting heights can be selected. -
Page 18: Setting The Required Functions
18" Electric Start Lawn Mower - VS600e Setting the Required Functions NOTE: This lawn mower has three functions. These functions can be converted by changing the accessory settings. Please see the following table for details. Mulching Grass Side discharge plug... -
Page 19: Operation
18" Electric Start Lawn Mower - VS600e Operation WARNING! • The blade begins to rotate as soon as the engine has been started. • Do not operate the machine in enclosed or poorly ventilated areas as the exhaust gas contains toxic substances. -
Page 20: Stopping The Engine
18" Electric Start Lawn Mower - VS600e Stopping the Engine Release the engine Start/Stop lever, it will return to its Initial position, the engine will automatically switch off. Battery Charging 1. Plug the charger input wire into the power socket and the power indicator light will turn on (green light). -
Page 21: Installing The Battery
18" Electric Start Lawn Mower - VS600e Installing the Battery 1. Open the battery case. 2. Insert the battery into the slot and push it in place. 3. Close the battery compartment cover. Start-Up Operation 1. First, check the lawn mower and add fuel and lubricating oil, if needed. -
Page 22: Installing The Control Panel
18" Electric Start Lawn Mower - VS600e Installing the Control Panel 1. Install the panel onto the push rod and fit it through the mounting hole. 2. Pull the wire through the slot in the panel, then attach the wire to the push rod. -
Page 23: Using The Self-Propelled Function
18" Electric Start Lawn Mower - VS600e Using the Self-Propelled Function This unit equipped with a self-propelled system. If you press the drive lever (clutch lever), the clutch for the drive will be closed and the lawnmower will start to move with the engine running. -
Page 24: Emptying The Grass Catcher
18" Electric Start Lawn Mower - VS600e Emptying the Grass Catcher As soon as grass clippings start to trail the lawn mower, it is time to empty the grass catcher. NOTE: Before taking off the grass catcher, switch off the engine and wait until the blade has come to a stop. -
Page 25: Lithium Battery Care And Maintenance
18" Electric Start Lawn Mower - VS600e Lithium Battery Care and Maintenance Top 3 Battery Care Requirements 1. Charge battery before first use. The battery may arrive with some charge, regardless of this the battery must be charged for 2 hours on the initial charge and 2 hours for each subsequent charge. -
Page 26: Maintenance, Storage And Transportation
18" Electric Start Lawn Mower - VS600e Maintenance, Storage and Transportation WARNING! Before performing any maintenance or cleaning work, switch OFF the engine and wait until the blade has come to a stop. General Cleaning • The lawn mower should be cleaned thoroughly every time after it has been used. -
Page 27: Engine Oil Replacement
18" Electric Start Lawn Mower - VS600e Engine Oil Replacement 1. Tilt the lawnmower towards the oil filler, have a container ready to catch the oil and remove the dipstick. Once the oil has been emptied, replace the dipstick and wipe clean any spillages. -
Page 28: Storing The Lawnmower For Short Periods
18" Electric Start Lawn Mower - VS600e 5. Clean the dirt and grass from around the blade mounting area. 6. Replace all 4 blades to ensure a smooth even cut and re-fit them on the mower in the reverse direction they were removed. -
Page 29: Maintenance Schedule
18" Electric Start Lawn Mower - VS600e Maintenance Schedule Performing routine maintenance correctly on your lawnmower will ensure you get years of trouble free use. Please keep this manual safe for future reference. It is recommended that the following maintenance schedule is adhered to. This will ensure the lawn mower operates correctly and is safe to use. -
Page 30: Troubleshooting
18" Electric Start Lawn Mower - VS600e Troubleshooting WARNING! Before performing any maintenance or cleaning work, switch off the engine and wait until the blade has come to a stop. CAUTION! • Improper repairs can result in the product functioning unsafely. This endangers yourself and your environment. -
Page 31: Specifications
18" Electric Start Lawn Mower - VS600e Specifications Engine Type 4 Stroke Displacement 175cc Starting System Push Button (Electric) Battery 2000mah Charger 240v Battery (for starting) 12V Lithium Charger (for starting) 240V Self-Propelled Blade Type 4 Swing blades Cutting Width... - Page 32 Some experts believe that the incorrect or prolonged use of almost any product may cause serious injury or death. To help reduce your risk of serious injury or death, refer to the information below. For more information, see www.datastreamserver.com/safety Consult all documentation, packaging The product has been supplied by a general merchandise ...
Need help?
Do you have a question about the VS600e and is the answer not in the manual?
Questions and answers
starter motor on my VS600e just goes around and will not engage motor
A possible cause of the starter motor not engaging on a Powerblade VS600e could be a discharged or faulty lithium-ion battery, since it uses an electric start system. Other possible causes include a faulty starter button, loose connections, or an issue with the engine's electrical system.
This answer is automatically generated
I have lost the charger for mower and need a replacement vs600e
The replacement charger for the Powerblade VS600e mower must be a Lithium-ion specific charger.
This answer is automatically generated