Advertisement
Quick Links
770 Rework Installation Sheet
IMPORTANT: Wear Safety glasses before starting the replacement of parts.
Remove screw and take out battery pack
1
Remove foam, cam & screws and discon-
4
nect cables
Remove PCB
5
Current PCB
Switch
Holder
New PCB
Remove 5 screws and take off the back
2
plate
Screw below center label
Assemble New PCB
6
A
B
Before placing PCB connect
cables orientation
as shown
Override
Switch
Reader
770 LOCK PCB + PRIVACY MECH. PARTS
New privacy
Switch
New
Cam
Assemble protective bracket and hold with
3
one of the 5 screws from step 2
C
PCB must be under
plastic tab
D
Pass cables in
housing gap push
Motor
cables away from
the screw head
Protective
Bracket
Protective Bracket
Use screws from step 4
PK 36 11 _ 07_ 1 2
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for ilco 770
- Page 1 770 Rework Installation Sheet IMPORTANT: Wear Safety glasses before starting the replacement of parts. 770 LOCK PCB + PRIVACY MECH. PARTS Current PCB New privacy Switch Switch Holder Protective New PCB Bracket Remove screw and take out battery pack Remove 5 screws and take off the back...
- Page 2 770 Rework Installation Sheet Connect privacy switch to PCB. Location Assemble the switch holder, push down Assemble privacy switch on switch holder until it sits on the housing tab, be carefull as shown not to pinch wires. Switch lever orientation Remove protective bracket Assemble new cam.
Need help?
Do you have a question about the 770 and is the answer not in the manual?
Questions and answers