1 1
Medistrom
Battery and Backup Power Supply
User Manual
THIS PACKAGE INCLUDES:
Pilot-24 Lite
Apex ICH / Resvent iBreeze kit for Pilot-24 Lite
Battery Carry Sleeve
Pilot-24 Lite is manufactured with genuine LG industrial grade rechargeable
lithium ion cells. The Pilot-24 Lite can be used as a backup power source to
prevent interruption to PAP therapy in the case of a power outage. Pilot-24 Lite
can serve as a portable PAP battery during travel by air, land, or sea when the
mains power source is not available.
Pilot-24 Lite has a USB port (output: 5V 2.5A) which can be used to charge cell
phones, tablets and other commonly used handheld devices rated for receiving
the above USB power output.
Pilot-24
Lite
Intended Use
Medicare Health & Living Ltd.
1.
Charge Port
Plug the compatible AC adapter into this port (use the short
charging adapter cable if required). Ensure that the AC adapter is
plugged into the mains power outlet. Once the battery is charging
the 4 green Charge Level Indicator Lights will turn on.
2.
Multi-Function Button
Pressing the button once will show the battery's charge level (if the
battery is in Standby Mode: refer to Stand-by Mode on page 3).
Holding the button for 3 seconds will turn the LED Flashlight On and
Off.
3.
Blue "ON" Indicator Light
The light will shine solid blue once the battery is connected and is
sending power to a compatible PAP device.
4.
Green Charge Level Indicator Lights
When the battery is being charged, the lights will blink, and then
shine solid green showing the level of charge going from Lo to Hi.
Refer to page no. 2 for a guide to charge levels.
Control Panel
Need help?
Do you have a question about the Medistrom Pilot-24 Lite and is the answer not in the manual?
Questions and answers
Just preparing for a trip and the medistrom battery sounds an alarm every time I plug in the cable from the battery to the machine. Please advice urgently.
The Medistrom Pilot-24 Lite battery sounding an alarm when plugged into the machine likely indicates an issue such as improper connection, incompatible device, or a fault in the setup. The exact cause or meaning of the alarm is not provided in the context.
This answer is automatically generated