Advertisement
RF TUNER-REAR VIEW
DISASSEMBLY INSTRUCTIONS
TV CHASSIS REMOVAL
1.
Remove seven push-on type control knobs.
2.
Remove six screws holding rear cover in place. Remove rear cover.
3.
Disconnect built-in antenna.
4.
Disconnect speaker.
5.
Disconnect audio lead.
6.
Disconnect ground lead from picture tube.
7.
Remove six 7/16" hex head bolts from chassis. Remove chassis.
8.
Remove four 11/32" nuts from speaker. Remove speaker.
RADIO CHASSIS REMOVAL
1.
Remove five push-on type control knobs.
2.
Disconnect built-in AM antenna.
3.
Disconnect FM antenna.
4.
Disconnect phono leads.
5.
Remove wood screw at rear of track.
6.
Remove three 1/4" hex head screws fastening rear cover.
7.
Remove radio and 45RPM phonograph unit from rear of cabinet.
33 1/3-78 RPM PHONOGRAPH REMOVAL
Remove the fillister head machine screw at rear of 33 1/3 - 78 RPM phono track.
Remove from front of cabinet.
NOTE: FOR PICTURE TUBE REMOVAL, IT IS NECESSARY TO REMOVE THE TV CHASSIS AS OUTLINED ABOVE.
TUNING GANG FULLY CLOSED
DIAL CORD STRINGING
PAGE 29
Advertisement
