cogeco TiVo PVR T6 Replacing Manual

Replacing your Cogeco TiVo PVR
Connecting your TiVo
1
A B
Configurating your TiVo PVR
2
After having connected your TiVo PVR to your television, use your remote and follow the following steps to
activate your device.
1. Press on the "TiVo" button from your remote to
access the home page and go to "MENU".
4. Select "Repeat Guided Setup".
7. Select your preferred language.
PVR
®
A. Connect the coaxial cable from the wall outlet to the MoCA input
of your TiVo.
C
Connect the TiVo HDMI output to one of your TV HDMI inputs with
B.
the HDMI cable provided with your device.
Connect the power supply to your wall power outlet.
C.
D.
Take note of the HDMI input used. (e.g. HDMI-1).
E. Press on the INPUT or SOURCE button of your HDTV remote.
Once you see the welcome screen, you'll then be ready to start
the activation process.
2. Go to "HELP".
5. A new window will appear. You need to press 3 times
on the red thumb button and then once on Enter (last
one on the bottom right of the remote).
8. Select "Begin Guided Setup".
3. Select "Reset to Defaults".
6. Select "Canada".
9. Enter the postal code, as indicated in the received
email "XYZ XYZ".