Front Panel Control; Rear Panel - Fortinet FortiAI 3500F Quick Start Manual

Front Panel - Control
1 2
1
Hard Drive Power LED indicators
Green: Operating normally
Off: Hard drive off
2
Hard Drive activity: Activity dependent on drive carrier
Flashes Green for 2 secs: Identifying drive preparing for removal
Off: Drive ready for removal
Flashes Green, Amber, and then turns off: Predicted Drive Failure
Flashes Amber four times: Drive failed
Solid Green: Drive online
Flashes Green for 3 secs,
Drive rebuild stopped
3
Power Button LED turns the device on/off
Green: Power is on
Off: Power is off
4
USB (2x USB 3.0) for future use
5
Micro USB not in use
6
VGA Port (DB15) connect to a display
6
3 4
Amber for 3 secs, and turns off after 6 secs:
1 2
5 6
1
ID Button & LED press to identify a system in a rack
Blue: ID function is on
Off: ID function is off
2
IPMI Port not in use. Vist http://cookbook.fortinet.com/changing-ipmi-password, to
change the default password
3
CLI Console Port (DB9) optional connection to the management computer.
4
VGA Port (DB15) connect to a display
5
USB (x2 USB 3.0) for future use
6
Port 1 (default management port) 10Gigabit Ethernet connection, IP 192.168.1.88
Port 2 (default sniffer port) 10Gigabit Ethernet connection
Green: Connected at 10Gbps
Link
Amber: Connected at 1000/100/10 Mbps
LED
Off: Not connected
Flashing
Act
Off: Not in use
LED
7
Ports 3 & 4 (1Gbps) 2x 1Gigabit Ethernet connection
Green: Connected at 1Gbps
Link
Amber: Connected at 100/10 Mbps
LED
Off: Not connected
Act Flashing
Off: Not in use
LED
8
Redundant Power Supplies (2x) 120 - 240V AC, 11.5A, 50/60Hz
Green: The power supply is operating normally
Flashing
Off: No power connected

Rear Panel

4 5 6 7
3
Green: Transmitting & receiving data
Green: Transmitting & receiving data
Amber: Power supply failure
8
7