Accutone BT1000 User Manual

BT1000
Bluetooth Headset for Business
with Noise-Cancelling Microphone
Main Interface & Functions
Interface & Controls
1. Metallic Headband
2. Vol Up (+) Button
3. Multi-Function Button
4. Vol Down (-) Button
5. Micro-USB Charging Jack
6. Rotatable Mic Boom
7. Bendable Mic Boom
8. LED Indicator
9. Foam Ear Cushion
10. NC Microphone Chamber
11. Bluetooth Pairing Button
12. Adapter LED Indicator
Connection & Installation
A. Universal BT Audio Adapter
1. The adapter that comes with the box has been pre-paired
with this particular BT1000 headset.
2. There is no need to pair the headset unless the headset fails
to connect.
3. If your device (ie. Notebook, Smartphone, Tablet or TV box)
comes with bluetooth connection, ALWAYS use the device's
default connection, do not connect the BT Audio Adapter if
your device has bluetooth inbuilt.
B. Setup
If you are certain your host device does not come with
bluetooth connection:
1. Connect the BT Audio Adapter to any USB port of your
computer/device.
2. The Adapter LED Indicator will immediately light up blue
with slow blink, indicating Paired and Online.
3. Turn on your BT1000 headset by pressing and holding the
Multi-Function Button for 2 seconds.
4. The headset's LED Indicator will lit blue blinking twice every
2 seconds, also indicating Paired and Online.
5. Make sure your computer's audio device is "USB Audio
Device".
C. Pairing
1. If you are replacing a new headset OR for some reason your
headset no longer connects to the adapter, press and hold
Bluetooth Pairing Button for 5 seconds until the Adapter
LED Indicator flashes quickly, indicating Pairing Mode.
1
9
2
3
4
2. Press and hold the Multi-Function Button for 5 seconds
until LED Indicator flashes quickly red and blue.
3. When you see the headset flashing red and blue rapidly, it
indicates the headset is now in pairing mode.
4. Make sure the LED Indicator on the adapter is still flashing
blue quickly.
5. Wait for about 30 seconds until the units paired, it may take
longer if you are surrounded by various wireless devices like
wireless routers, computers, smartphone or tablets. Try to
turn off bluetooth on your other devices if this process takes
too long.
6. Once the LED Indicator on the adapter flashes slowly AND
the LED on the headset switches back to flashing blue only,
the devices are paired.
7. Pairing completes.
D. Pairing Headset to Other Devices
First of all, switch your BT1000 headset into pairing mode.
Follow the same steps as above, pressing the Multi-Function
Button for 5 seconds until the LED Indicator flashes red and
blue quickly.
For Smartphones & Tablets under iOS
- Go to the settings page, select bluetooth, under Other
Devices, select "BT1000", wait for it to connect, and lists
under My Devices.
For Smartphones & Tablets under Android
- Go to the settings page, select bluetooth, under Available
Devices, select "BT1000", wait for it to connect, and lists
under Paired Devices.
User Manual
11
12
6
8
5
7
10