Time/ Date Setting - GIORGIO FEDON VD53 Warranty Booklet Instruction Manual

HOW TO SET A THREE-HAND WATCH WITH CHRONO-
GRAPH (RONDA 5030.D)

TIME/ DATE SETTING

1) Pull out the crown to position 2.
2) Turn the crown unit the previous day's date appears.
Note:
Do not set the date between 9:00P.M. to 3:00 A.M. Otherwise the
date may not change properly. If it is necessary to set the date during
that time period, rst change the time to any time outside this period,
then set the date.
3) Pull out the crown to position 3. Advance the hour and minute hands
until the desired date appears.
turning the crown.
Note:
While setting the time, be sure to check that the correct A.M. or P.M.
period is set.
4) Push the crown back in to position 1.
HOW TO USE STOPWATCH
1) Press button A to start/ stop the stop watch.
2) Press button B to control the split time, restart and reset.
STOPWATCH HAND POSITION ADJUSTMENT
1) Pull out the crown to position 3.
2) Press and hold buttons A and B at the same time for 2 seconds and
then release them.
where it was.
3) Press button A to set the stopwatch second hand.
4) Press button B to set the next hand.
5) Press button A to set the stopwatch hour hand.
6) Press button B to set the next hand.
7) Press button A to set the stopwatch minute hand.
8) Push the crown back in to position 1.
44
en set the hands to desired time by
e stopwatch hand moves back and returns to