Summary of Contents for Bergman PRO XK01-40A
- Page 1 20V Cordless Pressure Washer Product Code: 3206741 Instruction Manual Please retain this manual for future reference...
- Page 5 4. Charging the battery pack IMPORTANT: Before use, ensure the battery is charged. The battery pack as a power indicator, press the button on the pack to see the current state of charge. To charge the battery remove it from the pressure washer (for best results charge at room temperature).
-
Page 6: Troubleshooting
TROUBLE SHOOTING Description Possible Cause Solution Suggestion Lithium battery power indicator flickering Low battery Battery Charging No power on after machine on Low battery Battery Charging Stop working unexpectedly High temperature, automatic protection Turn on after the heat temperature drops battery and charger Reinsert the battery into the charger to... -
Page 7: Technical Data
OTHER WARNINGS AND CAUTIONS Do not put the higher-pressure cleaner near any fire source or any other high temperature places. Do not expose lithium battery pack in heat or fire source and avoid storage in the direct sunlight environment. Do not make the lithium battery pack subjected to mechanical impact. Do not make lithium battery pack short-circuit. -
Page 8: Disposal And Recycling
DISPOSAL AND RECYCLING The crossed out Wheelie Bin logo is used to highlight electrical products that should not be disposed of with normal household waste. Scotts Ltd has contributed to the funding of an alternative network of UK recycling facilities. Please visit www.recycle-more.co.uk to find where you’re nearest recycling point is... - Page 9 QUICK START GUIDE STEP 1. Charge and Install the battery pack STEP 2: Connect the extension pipe, jet pipe and soap dispenser to the pressure washer. STEP 3: Connect the water inlet hose STEP 4: Squeeze the handle trigger and your away. On/off trigger switch Water inlet hose here Scotts Ltd.
Need help?
Do you have a question about the PRO XK01-40A and is the answer not in the manual?
Questions and answers