Advertisement
Description of buttons
Turn ON/OFF
Saving color or mode
Play&pause button,10 build-in
mode
Brightness button
long press dim up,
long press again,dim dowm.
Operation
1. Learning ID with SR-1009 series:
Click learning button on RF receiver (SR-1009XX)→
Short Touch a zone button Z1,Z2,Z3 or Z4 (sender 2830RGB)→Touch dimming slider
The light flick means ID learnt successfully.
Touch zone button Z1/Z2/Z3/Z4 separately over 2 seconds, which will turn ON/OFF separately.
The backlight blue is ON for the zone, yellow is OFF for the zone.
Notice : Each sender can control 4 different zones separately,each zone can be learned endless
receivers,so one sender can control as many receivers as you can.
Short press is choose the zone.
Long press can turn off/on each zone.
a.Save color :choose a zone or multiple zones from(Z1,Z2,Z3,Z4)
Touch dimming slider to get a favorite color →
button over 2 seconds →
Hold
The light flicking means successfully saved.
b.Save mode:choose a zone or multiple zones from(Z1,Z2,Z3,Z4) →
button,10 build-in modes inside, choose the favorite mode →
press
Hold
button over 2 seconds-The light flicking means successfully saved.
c.Reply:Short touch button
to replay the color or mode just saved.
Press
Button, mode will run.Press it once,it runs one mode.Press button again,it stops,then press one more time,
it will enter next mode.There are total 10 build-ion modes.
Long press dim up,Long press again,dim down.
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
Please ensure that the cable is secured tightly in the connector
7) For update information please consult your supplier.
4 zones control seperately or
syhchronously, each zone could
control multiple receivers.
→
Warranty Agreement
1) We provide lifelong technical assistance with this product:
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Advertisement
