Advertisement
Quick Links
iMeditron® Smart Glasses
for Sitting Posture Training
Instructions
version 1.1
Thank you for choosing iMeditron® Smart Glasses. This manual gives you a brief introduction to the
basic functions and operation of this product. However, with the continuous updating of new
functions of software and hardware, when you receive the actual product, there may be new
functions or functional upgrades that are not covered by this manual. Please forgive the
inconvenience. Welcome to contact us through the official website and customer service in time to
solve any problems in your use.
Please read the instructions first.
1. Before using this product, please read the instructions carefully. Please use the instructions
correctly so as not to cause unnecessary trouble.
2. This description is based on the default settings of Eye-loving Smart Glasses.
3. Understanding that the schematic pictures in this note may not conform to the appearance of the
products actually received.
4. Please keep the instructions properly for future operation and maintenance.
5. The following design and specifications are subject to change without notice.
App
1
Advertisement
Summary of Contents for iMeditron iMed11
- Page 1 Instructions version 1.1 Thank you for choosing iMeditron® Smart Glasses. This manual gives you a brief introduction to the basic functions and operation of this product. However, with the continuous updating of new functions of software and hardware, when you receive the actual product, there may be new functions or functional upgrades that are not covered by this manual.
-
Page 2: Basic Parameters
Basic parameters： ·Product name: iMeditron ® Smart Glasses ·Product model: iMed11/12/13/16 ·Connection mode: Bluetooth 4.0 BLE, RF2.4G ·Working mode: acceleration sensor, ultraviolet and ambient light sensor, distance sensor, etc. ·Battery: lithium polymer 60mAh ·Charging interface: Micro USB, 5V (typical) ·Input current: fast charging 45 mA (typical), 65 mA (maximum), trickle charging: 6mA (typical) ·Power consumption: 80μW (dormant) to 60mW (alarm while working) - Page 3 Use special attention: The best use scenarios are reading and writing under indoor lighting. Other scenarios are used as usual, but please note: ·Don't wear it in swimming, bathing, rainstorm, etc. ·Do not operate buttons when it rains or sweats too much during exercise ·It is not recommended to wear it in vigorous and antagonistic sports.
- Page 4 Boot guidance and usage instructions：...
- Page 5 Reminder： Inverted smart glasses will allow them to quickly enter dormancy mode, thus prohibiting alarm and power saving. Initial use, will feel smart glasses response is relatively slow, that is because the product's "IMSS intelligent scene" algorithm in order to avoid too frequent alarm, so as not to distract your attention!
-
Page 6: Battery Charging Instructions
Switch reminders and increase or subtract volume: press the button to feel the vibration feedback of smart glasses. Each time the button is pressed, the iMeditron Smart Eye circulates as follows: Alarm default value （ As technology progresses, the following parameters or data may be inconsistent with the actual product you get, please understand）：... - Page 7 Operation and status description： device status User operation Indicator light Vibrator Voice horn blue tooth Vibration in Start Button Broadcast Short push Orange, green quiet and broadcasting, no shutdown "Voice Mode" button indicator flashing vibration connection shut state in Voice Mode mode down in 3 minutes Dormant...
- Page 8 App and Bluetooth connection： 1. Use WeChat and other software to scan the App QR code of the instruction manual. Then choose to open it in the browser. Download app, then install it. 2.Enter the mobile phone setup interface and turn on Bluetooth 3.Turn on the smart glasses button switch, if it has been turned on, you need to turn it off before rebooting 4.Open app, app will automatically find and connect smart glasses, if the system appears Bluetooth...
-
Page 9: App Settings
App settings： ·You can set the display and reminder mode of the state of electricity and so on. ·You can set the sensitivity of smart glasses. ·Reminder conditions can be personalized ·Schooling Time Setting（Vibration reminder is adopted by default, and sound reminder is forbidden）. - Page 10 ·Holiday time setting（The role of school settings and weekend class settings during holidays is blocked）. ·Weekend Class Time Setting（Vibration reminder is adopted by default, and sound reminder is forbidden）. ·Sleep reminder settings.
- Page 11 Product failure and handling table. ： Fault phenomenon Terms of settlement Shell cracks due to Contact customer service and enter the after-sales service manufacturing process after confirmation. defects themselves Method 1. Press the button for 3 seconds to shut down and Orange light restart.
- Page 12 2. Keep iMeditron smart glasses in the product protection standard (IP53), not to be worn in the case of swimming, bathing, rainstorm and other water conditions, and operate buttons in the case of raining and sweating more;...
- Page 13 Copyright description:： ·The copyright of this manual is owned by Sichuan iMeditron Vision Care Intelligent Tech Co., Ltd. This manual is protected by international copyright law. ·The final interpretation of this specification belongs to Sichuan iMeditron Vision Care Intelligent Tech Co., Ltd.