After use or for any longer period of time without attendance, turn the gas supply off at the mains and ensure that the gas controller (1) is shut. The range: powerjet 2 Art.No.: 6.006.000 Tubing connector with swivel nut Stainless steel stand...
Page 4
(1/4“) can be connected to the threaded adapter G 1/4" (6) of the powerjet 2 directly. For a DVGW-safety tubing with push-fit connection the connector with swivel nut (7, included ) has to be mounted to the threaded adapter G 1/4" (6).
Page 5
Pull the empty gas cartridge (10) out of the handle (5). Check the sealing (9). Replace the sealing if damaged or worn (Sealing for powerjet 2, Art.-No. 6.006.010) Remove the blue protective cap of the new gas cartridge. Push the gas cartridge (10) into the handle (5) up to the stop-position.
Page 6
5. Routine service and maintenance Ensure that the sealing (9) is in place and in good condition. Inspect every time you use the powerjet 2. Replace the sealing if damaged or worn (Sealing for powerjet 2, Art.-No. 6.006.010) 7. Warranty: The powerjet 2 is covered under our two-year manufacturer warranty against any manufacture defects in material.
Page 7
Technical Data Type: powerjet 2 Gas supply and Gas types: natural gas E/LL, liquid gas consumption 20 - 50 mbar 2ELL3B/P Cartridge CV360, Camping Gaz (Camping Gaz / Coleman Part #: 39 352) Connected load: 0,13 kg / h liquid gas...
Need help?
Do you have a question about the powerjet 2 and is the answer not in the manual?
Questions and answers