Control Panel Design - Electrolux AURA LOGIC Instruction Manual

CONTROL PANEL DESIGN
VIVA LOGIC
CRYSTAL LOGIC
* PLS DO NOT MATCH THE CONTROL PANEL WITH YOUR MACHINE.
THIS IS SCHEMATIC DIAGRAM ONLY AND CAN VARY FROM YOUR MACHINE.
！
In order to protect controller， the interval of switching on and off power should be more than 30 sec.
FULLY AUTOMATIC PROGRAM
Fully Automatic Program
Features of eight programs and three special functions.
(minutes)
Suitable for mixed clothes.
Can select "Do It Yourself"
setting in NORMAL program.
Suitable to wash under wear, SOAK 20
Delicate
embroidery clothes. + Wash 17
Suitable for heavy stained
Heavy
SAOK +
clothes, jeans, bed sheets,
WASH 18
etc.
SOAK 20
+ Wash 17
Machine reduces the Rinse cycle to 1 time. This program is used to save water.
Water Save
This function can be selected with "NORMAL" program only.
This function is individually selected and machine do SPINNING for 60minutes for better water
Air Dry
removal from clothes.
This function is individually selected and machine taken water and do spinning of tub. Total
Tub Clean
duration for this function is 4minutes. This function is preferred when machine is used after long
time.
The total time includes the water entry time and drain time. The total time can change depending
on the water pressure in supply pipe and drain speed.
Additional explanation
1． ＂ CHILD LOCK＂ function： After starting， press the ＂
be activated. The indication is displayed by "CL" one time for one second after every 5 seconds. Press same two
buttons to deactivate the Child Lock. All button including "Power" button get inactive during Child lock.
2． In the course SOAK ， the washer does not stop completely，
evenly mix with the detergent．
(minutes) (minutes) (minutes)
-
1
(Only Drain)
3
(Soft Spin)
2nd Rinse : 11
3rd Rinse : 11
4th Rinse : 11
WASH＂ and ＂ RINSE: button at same time, this child lock can
it will wash interval to let the washing
(minutes)
41
10
64
39
58
37
65
41