Contents Important Safety Instructions ....................2 Safety ......................................2 Identifying the Parts ......................4 Main Unit ....................................4 Remote Control ..................................5 Preparations...........................6 Prepare the Remote Control ............................6 Replace the Remote Control Battery ..........................6 Precautions Concerning Batteries ..........................6 Connections ...........................6 AUX IN Socket ..................................
Important Safety Instructions the provided plug does not fit into your outlet, C AUTI O N consult an electrician for replacement of the RISK OF ELECTRIC SHOCK obsolete outlet. DO NOT OPEN 10 Protect the power cord from being walked on AV IS or pinched, particularly at plugs, convenience receptacles and at the point where they exit...
Page 5
To reduce the risk of fire or electric shock, do not DO NOT INGEST BATTERY,CHEMICAL BURN expose this apparatus to rain or moisture. The HAZARD apparatus must not be exposed to dripping or The remote control supplied with this splashing and objects filled with liquids, such as product contains a coin/button cell battery.
Identifying the Parts Main Unit Front View 1 Remote Control Sensor Receive the signal from the remote control. 2 Display Top View button Switch the unit between ON and Standby mode. 4 SOURCE button Select the play function.
5 VOLUME - / + buttons Increase/decrease the volume level.
Remote Control Switch the unit between ON and Standby mode. 2 SOURCE buttons Select the play function. 3 INTRO In CD/USB mode, every soundtrack will be played for 10 Sec. 4 REPEAT Press to Network System Reset. 5 INFO Displays playback information. 6 CLOCK In standby mode, press and hold to activate clock setup.
• Do not place the remote control under direct Preparations sunlight or near sources of excessive heat. • Remove the battery from the remote control Prepare the Remote Control when not in use for a long period of time, as The provided Remote Control allows the unit to be corrosion or battery leakage may occur and operated from a distance.
Set the Clock Manual Setting the clock can only be done in --:-- 00:00 STANDBY mode. 1 In STANDBY mode, press and hold the CLOCK button on the remote control until the hour digits are flashing. Press the button on the remote control to select 12/24 hour format. 2 Press the buttons on the remote control or on the unit to adjust the hour digits while flashing, ...
General Operation Standby/ON When you first connect the main unit to the mains socket, the main unit will be in Standby mode. button on the remote control or on main unit to switch the main unit ON. • Press the button on the remote control or on main unit to switch the main unit back to Standby mode.
CD/USB Operation USB Operation 1 Insert the USB device. 2 Press the SOURCE button on the unit or the USB button on the remote control to select USB mode. 3 Play starts automatically. If play does not start automatically, Select a title/chapter/track and then press button.
Random Playback Press the SHUFFLE button on the remote control to switch the randomly play the song ON/OFF. • SHUFFLE : Randomly play the song. “ ” lights up. SHUF OFF: Randomly turned off. Select repeat play options Press the REPEAT button repeatedly on the remote control to select repeat play modes. The selected mode will show on the display.
If you cannot find the unit, press the "PAIR" button on the remote control to be searchable. The display will show “PAIR” and you will hear "Pairing" from the unit. 3 Select “A&S Hurricane-S” in the pairing list. On successful pairing, you will hear "Paired" from the unit, and the display panel shows “BT”.
If you want to reconnect your device to this player, place it within the operational range. If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player. If they are connected, display panel shows "BT".
Into the distribution network mode. > Waitting and follow the instructions on the screen smartphone. > The Speaker will appear as “Hurricane-S XXXX”. (xxxx: is a unique code for your speaker. The name can be changed at the next stage).
Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. No power Ensure that the AC cord of the apparatus is properly connected . Ensure that there is power at the AC outlet.
Specifications Model Name A&S Hurricane-S Bar Power Supply AC 220-240V~ 50~60Hz Power Consumption 30 W / (Standby) < 2 W 500mA Dimensions (W x D x H) 175 x 175 x 250 mm Audio input sensitivity (AUX IN) 500mV Frequency Response...
Need help?
Do you have a question about the Hurricane-S and is the answer not in the manual?
Questions and answers