Table of Contents
Advertisement
OPERATION
1.
Place the fan on a stable, level surface.
2.
Plug the fan in the mains socket.
3.
Press the 1, 2 or 3 control button to select the desired speed. To turn off the fan, press the 0 control button.
0= Off 1= Low speed 2=Medium speed
4.
To make the fan oscillate, push down the oscillation knob located on the top of the motor housing and
the fan will oscillate from side to side.
To stop the fan from oscillating, lift up the oscillation knob.
5.
Tilting Adjustment
The airflow can be adjusted upward or downward.
a.
Hold the base and slightly loosen the adjusting screw by turning it anticlockwise.
b.
Tilt the fan to the desired wind direction (i.e. either upward or downward).
c.
Tighten the adjusting screw by turning it clockwise.
CLEANING AND MAINTENANCE
Always turn off and unplug the fan from the mains socket before cleaning.
Once the fan guard was assembled, it's forbidden to take off the guards.
Clean the fan with a slightly damp cloth, and then dry it.
Do not immerse the motor housing in water or any other liquid.
Do not use chemical or abrasive cleaner.
Storage
When not in use keep the fan in a safe, dry location.
•
If stored disassembled, it is recommended to use the original (or appropriately sized) box.
•
If stored assembled or partially assembled, protect the fan head from dust.
SPECIFICATIONS
Ratings: 220-240V~, 50Hz 40W
Description
Maximum fan flow rate
Power
Service value
Fan sound power level
Standby power consumption
Maximum air velocity
Service value measurement standard
For more information, please contact
3=High speed
Technical informations
Ref: OCEAVT30CM
Model: FT30A
Symbol
F
P
SV
L
WA
P
SB
C
IEC 60879:1986 (corr. 1992)
AMC
123 quai Jules Guesde
94400 VITRY SUR SEINE
France
Page 6 of 8
Value
Unit
19.53
m³/min
35
W
0.56
(m³/min)/W
52.049
dB(A)
-
W
2.45
m/s
Advertisement
Table of Contents
