Download Print this page

GLG DMX SPLITTER 8R User Manual

Advertisement

Quick Links

LED indicators
Each channel comes with one green signal indicator. When the unit is powered on
the red power indicator is lit up. When the unit is receiving DMX signal, all green
signal indicators light on.
This is useful to immediately identify a bad output
channel.
LED Status
Power indicator is not lit up or dim while Signal In
indicator and signal output are OK.
Both power indicator and signal indicator are
not lit up. Also there is not signal output.
Power indicator is OK. Signal indicator is not
lit up while signal output is OK.
Power indicator is OK. Signal indicator is not
lit up and there is not signal output.
SPECIFICATIONS
WEIGHT & DIMENSIONS
Length ...................................................................................................................................... 482 mm
Width ...........................................................................................................................................44 mm
Height ...................................................................................................................................... 145 mm
Weight ..........................................................,................................................................................3.0kg
POWER
AC Power ...........................................................................................AC 110V or 230V 50-60Hz
Fuse .....................................................................................................................................F1A / 250V
Power consumption .........................................................................................................6W max.
I
MPORTANT INFORMATION!
In order to optimize the recovery and recycling of the materials
that old appliances contain and reduce the impact on human
health and the environment, ensure that this product is recycled
at the end of its life.
www.goedlichtengeluid.nl
Possibility
Power indicator fails. Check and replace it.
Open circuit between transformer and PCB.
Check the 9V output from transformer to PCB.
Signal indicator fails. Check and replace it.
The 75176 chip on PCB fails. Check and
replace it.
4
GLG is a brand name of GOED licht en geluid
DMX SPLITTER 8R
User Manual
Thank you for purchasing of the DMX SPLITTER 8R. The DMX Splitter is a DMX signal
outputs. Also it boost your DMX signal for extensive cable runs between DMX
manual carefully before use.
What is included
The following items are included in the box:
▪ 1pc DMX SPLITTER 8R
▪ 1pc Power cord
▪ 1pc User Manual
Carefully unpack the carton, check the contents to ensure that all parts are present,
and have been received in good condition. Contact your supplier immediately and
retain packing material for inspection if any part is missing or damaged.
Safety Instruction
!
persons, follow these important safety instructions:
▪ This product is intended for indoor use only!
▪ Please keep this User Guide for future consultation.
▪ The unit must be installed in a location with adequate ventilation. Be sure no
ventilation slots are blocked.
▪ Make sure power cord is never crimped or damaged.
▪ Do not remove the top cover under any conditions. There are no user serviceable
parts inside.
• Disconnect the unit's main power when left unused for long periods of time.
• Never connect this unit to a dimmer pack.
• Never operate this unit when it's cover is removed.
www.goedlichtengeluid.nl
1
GLG is a brand name of GOED licht en geluid

Advertisement

loading
Need help?

Need help?

Do you have a question about the DMX SPLITTER 8R and is the answer not in the manual?

Questions and answers

Summary of Contents for GLG DMX SPLITTER 8R

  • Page 1 This is useful to immediately identify a bad output channel. Thank you for purchasing of the DMX SPLITTER 8R. The DMX Splitter is a DMX signal LED Status Possibility outputs. Also it boost your DMX signal for extensive cable runs between DMX Power indicator is not lit up or dim while Signal In Power indicator fails.
  • Page 2 Features Connection Diagrams ▪ 1. Connect DMX Out from your DMX controller to DMX In of DMX SPLITTER 8R. ▪ 1 input to 8 outputs plus DMX Thru ▪ 100% Electric isolation between input & output 3. A DMX splitter unit is required when DMX cable run is more than 100 meters or ▪...