Summary of Contents for Videotel Xeon 1.1
- Page 1 Digital System Installation Manual Revision Xeon 1.1 Technical Support (Mon-Fri 6am - 5pm) 619-670-4412 Extension #23 Emergency Support (After Hours And Weekends) 619-670-4412 Extension #69...
- Page 2 Index Section 1- Setting Up Main Server Page 2... Important Precautions Page 3... Unpacking And General Overview Of The Server Page 4... Connecting Cables To Computers Page 5... Connecting STBs Page 6... Programming STBs Important Notice Operators of this digital system should be aware that Io Group, Inc. doing business as Titan Media and Manplay does not license or otherwise authorize the public dis- play of its content.
- Page 3 Important Precautions In the following pages you will find detailed directions pertaining to the installation and operation of your new Digital Video System. Please note that some of the instructions may not be relevant to your specific system setup). Please read all pages before attempting to install the system and refer to it as needed.
- Page 4 Unpacking And Setting Up Server The picture to the lower left shows what a 200 channel digital computer server will look like completely set up. When your system arrives, the rack will come with the shelves (1), router (aka switch) and KVM (used to view multiple computers with 1 monitor) already installed.
- Page 5 Connecting back of server You will need to connect 3 wires (1-2- to the “Power Controller, that is pre attached to the back of the Powerfile. We attach loose wires to the rack with zip ties for shipping. You can cut the zip ties that have not been trimmed down.
- Page 6 This jack is used to connect your HDMI that would go to your main TV. (13) If you wish to connect 2 speakers in your booth and offer your customers “stereo” sound, this switch would need to be flipped to “2”. Contact Videotel for wiring procedure. Page 5...
- Page 7 Programing Your STBS After Server Is On Once your server is on, please go to the “Booth Ac- tivity” screen and make sure no green or red “Doors” appear on the screen. If your screen doesn’t look like the one to the left, all doors need to be deleted before registering your new booths.
Need help?
Do you have a question about the Xeon 1.1 and is the answer not in the manual?
Questions and answers