1. Manuals
  2. Brands
  3. Eurovik Manuals
  4. Security System
  5. NVR Series
  6. User's installation and operation manual

Eurovik NVR Series User's Installation And Operation Manual

H.264
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H.264 series NVR User's installation and operation
Manual
Welcome
Thank you for purchasing our NVR!
This manual is designed to be a reference tool for the installation and operation of your system.
Here you can find information about this series NVR features and functions, as well as a detailed
menu tree.
Before installation and operation please read the following safeguards and warnings carefully!
Important Safeguards and Warnings
Do not place heavy objects on the NVR.
Do not let any solid or liquid fall into or infiltrate the NVR.
Please brush printed circuit boards, connectors, fans, machine box and so on regularly. Before
cleaning the dust please switch off the power supply and unplug it.
Do not disassemble or repair the NVR by yourself. Do not replace the components by yourself.
Environment
Please place and use the NVR between 0
and 40 .Avoid direct sunlight. Stay away from heat
source.
Do not install the NVR in damp environment.
Do not use the NVR in smoky or dusty environment.
Avoid collision or strong fall.
Please insure the NVR level installation in a stable workplace.
Please install in ventilated place. Keep the vent clean.
Use within the rating input and output scope.
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Eurovik NVR Series

  • Page 1 H.264 series NVR User’s installation and operation Manual Welcome Thank you for purchasing our NVR! This manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series NVR features and functions, as well as a detailed menu tree.

  • Page 2: Table Of Contents

    Directory 1 Production Introduction ............................5 1.1 Product overview ............................5 1.2 Main functions .............................. 5 2 Open-package check and cable connections ....................7 2.1 Open-package check ............................. 7 2.2 Hard disk installation ............................ 7 2.3 Audio and video input and output connections ..................... 8 2.3.1 Video input connections ........................
  • Page 3 4.2.3 Backup ............................39 4.3 Alarm Function ............................40 4.3.1 Motion Detect ..........................40 4.3.2 Video Blind ............................ 42 4.3.3 Video Loss ............................. 43 4.3.4 Alarm input ............................. 44 4.3.5 Abnormal ............................44 4.4 System setup ............................... 45 4.4.1 General ............................45 4.4.2 Encode setup ..........................
  • Page 4 Page 4...

  • Page 5: Production Introduction

    1 Production Introduction 1.1 Product overview The series NVR is designed specially for security and defence field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format and G.711A audio compressed format which insures the high quality image, low error coding ratio and single frame playing.
  • Page 6 individual real-time video recording as well as searching, playback, network surveillance, recording check, downloading and so on multi-playback mode zoom at arbitrary region Net operating through net tele-surveillance in the real time tele-PTZ control tele-recording check and real-time playback Alarm linkage multi-route relay alarm output which is convenient for the alarm linkage and light control at the spot protecting circuits at the alarm input and output interface which protects the main machine from damage Communication interface...

  • Page 7: Open-Package Check And Cable Connections

    2 Open-package check and cable connections 2.1 Open-package check When you receive the NVR, please check first . First, please check whether there is any visible damage to the package appearance. The protective materials used for the package of the NVR can protect most accidental clashes during transportation. Then, please open the box and get rid off the plastic protective materials.

  • Page 8: Audio And Video Input And Output Connections

    ƒ\ C onnect VGA Output ƒ] Connect the network cable 2.3 Audio and video input and output connections 2.3.1 Video input connections Connect the nvr with network.Search and add IP cameras to nvr.Refer to chapter 3.3. 2.3.2 Video output connections and options The video output is divided into BNC(1.0V ,75 ) ,HDMI output and VGA output(the 3 modes can work at the same time).

  • Page 9: Audio Signal Input

    1、Do not stay in the turn-on state for a long time. 2、Keep the computer display normal working by demagnetizing regularly. 3、Stay away from the electro magnetic Interference. TV is not a credible replacement as a video output. It demands reducing the use time and control the power supply and the interference introduced by the nearby equipments strictly.

  • Page 10: Alarm Input Port Specification

    C. In the outlying end connect 120 resistance paralleled to reduce the inflection and insure the signal quality. D. The 485 AB lines of NVR can not connected with other 485 output equipments paralleled. E. The voltage between the AB lines of the decoder must be less than 5V. 4、...

  • Page 11: Alarm Output Port Specification

    The grounding of the power supply and the alarm sensor must be shared when used in external power supply. 2.4.2 Alarm output port specification 1 channels alarm output. There is external power supply when using the external alarm equipment. Please refer to the relay relevant parameters to avoid the overload that damages main machine. 2.4.3 Alarm output port relay parameters Type：JRC-27F Interface material...
  • Page 12 RS485 2、Connect the video line with the NVR video input. 3、Electrify the speed dome. Page 12...

  • Page 13: Basic Operation

    3 Basic operation Note: The button in gray display indicates nonsupport. 3.1 Turn on Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video output is multiple-window output mode.

  • Page 14: System Login And Add Ip Cameras

    3.3 System Login and Add IP cameras 3.3.1 System Login When the NVR boots up, the user must login and the system provides the corresponding functions with the user purview. There is one user settings. The name is Admin and has no password. Admin is the super user purview.
  • Page 15 (2)Right click on the preview interface,and click “Add IPC”. If you click “add ipc” next,nvr will show the ip cameras searched automatically in LAN.Click “Add” ,the selected ipc will be added to current channel. Page 15...
  • Page 16 If you click “Add All IPC”,please select a protocal,then nvr will automatically search and add IP cameras suported this protocal in LAN to all channels. Page 16...
  • Page 17 (3)Click “+” in the middle of the channel,nvr will show the ip cameras searched automatically in LAN.Click “Add” ,the selected ipc will be added to current channel. Page 17...
  • Page 18 (4)Connect nvr via IE ,click “setup--Device setting--System maintenance--channel mode setup”.Select channel and device,then click “Apply”.Fill in the ipc info on the right and click “Update”.Click “OK” to exit channel mode.You will see the ipc when you return to the preview interface. Page 18...
  • Page 19 Page 19...

  • Page 20: Ipc Parameters Synchronization

    3.3.3 IPC parameters synchronization (1)IP sync.Please go to "Main Menu -- Add IPC" . NVR will search the ip camras in LAN automatically.Click “Update IP” to sync the ip of ipc when nvr and ipc are in the same network segment. (2)Color setting sync.Right click on the preview channel and choose “Color setting”.NVR will sync the color setting with ipc when “Sync color set”...

  • Page 21: Preview

    (3)Encode config sync.Go to “Main menu--Encode config”.NVR will sync the encode parameters with IPC when “Sync encode set” is enabled. 3.4 Preview You can right click mouse to choose the switch between the windows. The system date, time and channel name are shown in each viewing window. The surveillance video and the alarm status are shown in each window.

  • Page 22: Desktop Shortcut Menu

    3.5 Desktop shortcut menu In preview mode you can right click mouse to get a desktop shortcut menu. The menu includes: Main Menu, Playback, Fast Playback， ， ， ， PTZ Control, Color Setting, Output Adjust, PTZ Tour， ， ， ， P2P, PIP,PAP,Logout,Preview setup, Add IPC,View1/4/8/9/16 screens.

  • Page 23: Playback

    Picture3.3 Main Menu 1.Switch page:3methods to switch pages in main menu:click the color picture on the sides of the main page;press the left key and slide left or right;click the dots below the main page. 2.Change background:click to change the background color. 3.Edit:click to enter edit mode.Items on first page are fixed.Drag items in the main page aera to change their positions.Drag items outside the main page area or click...
  • Page 24 2、 Main menu->Playback Picture 3.4 video playback 1. record 2. date and time 3. record type 4.channels 5. Playback control 6. files backup 7. speed hint 8. Timeline 9.smart search 10. editor 11. slice search 12.event search 【Record】Play files recorded. 【Date and time】Choose the date and time.
  • Page 25 【File backup】Go to backup files. Click the button and operate as followed. Note: The storage must be installed before the file backup. If the backup is terminated, the already backup can playback individually. Picture 3.5 detect the storage Page 25...
  • Page 26 Detect: Detect the storage connected with the NVR such as hard disk or universal disk. Backup: Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time. Picture 3.6 recording backup Remove：...
  • Page 27 Start Time: Set the searching time scan. 【Editor】Backup files between two time points. Click “Detect” to detect usb flash drive. Select channel，type，audio enabled or not，start time， then click “Search” to search record.Click “Editor”，then double-click on the ribbon to set begin time and double-click again to set end time,and then click “Backup”...
  • Page 28 【Playback control】Refer to the following sheet for more information. Button Function Button Function Play/pause Exit Stop Slow play Fast play Previous frame Next frame Audio Brightness Contrast Full screen Backup Smart search Editor Slice search Table 3.2 Playback control key Special functions：...

  • Page 29: Fast Playback

    Accurate playback： ： ： ： Input time (h/m/s) in the time column and then click button. The system can operate accurate playback according to the searching play time. Local zoom： ： ： ： When the system is in single-window full-screen playback mode, you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom.
  • Page 30 Picture 3.8 PTZ setup 【CAM】Choose the dome camera input channel. 【Speed】Set the PTZ rotation range. Default range: 1 ~ 8. 【Zoom】Click button to adjust the zoom multiple of the camera. 【Focus】Click button to adjust the focus of the camera . 【Iris】Click button to adjust the iris of the camera.
  • Page 31 Picture 3.9 Preset Settings 2）Preset Point Calls In Picture 3.8, click “preset”,choose the preset number , PTZ turn to the corresponding preset point. Picture 3.10 PTZ Control 2、 、 、 、 Cruise between Points Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on the line 1）Cruise Between Points Settings Cruise lines is connected by multiple preset points, setting procedure is as follows:...

  • Page 32: Color Setting

    Step 1: set your preset points . Step 2: click button “Cruise Line”, then write proper value into the Preset Points blank and interval blank，then click button “Add” . to save, complete setting. Step 3:click Remove Preset：click the preset point item in the information box, then click Delete button.The preset point will be removed after that.

  • Page 33: Pip

    Picture 3.12 Color Setting 3.5.6 PIP on the display of any single channel, right-click the mouse and click PIP function, then in the pop-up window, you can choose any other channels to view together, and you can drag the window. 3.5.7 PAP On the live display of single channel, right-click the mouse, and click “PAP”, then you can zoom many areas and and view these zoomed areas at the same time.

  • Page 34: Output Adjust

    3.5.8 Output Adjust Adjust TV output area parameters. You can use the desktop shortcut menu or enter [main menu]> [Output adjust]. Picture 3.13 Output Adjust 3.5.9 Logout ogout, shut down the system or reboot up. You can use the desktop shortcut menu or enter [main menu].

  • Page 35: Window Switch

    【shut down】Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint. After three seconds, the system is shut down. Cancel midway is of no effect. 【reboot】Quit the system. Reboot up the system.. 3.5.10 Window switch Preview in single window/four windows/eight windows/nine windows/sixteen windows according to your choice.

  • Page 36: Main Menu

    4 Main menu 4.1 Main menu navigation Main menu Sub menu Function Config Set the recording configuration, recording type, recording time section Record playback Set recording look-up, recording play, video file storage backup Detect backup equipment, backup the selective files Motion Set motion detect alarm channel, sensitivity, area, linkage parameters: detection...
  • Page 37 Set channel, PTZ protocol, address, baud rate, data bit, stop bit, check configuration IP Cam Config Search and add ip cameras Tour Set patrol mode and interval time System Time Set system time Video Standard Set video standard Resolution Set display resolution Wireless Set 3G dial-up connection Color Setting...

  • Page 38: Record

    Logout/shutdo Shut down Logout, shut down or reboot wn/reboot Entertainme Game Tetris 4.2 Record 4.2.1 Record Config Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive recording in the first startup. You can enter [main menu]> [record mode] to set. Picture 4.1 Record Config 【CAM】Choose the corresponding channel number to set the channel.

  • Page 39: Playback

    Event:All record except general record Stop:The according channel stops recording in the set time section 【Period】Set the time section of common recording, The recording will start only in the set range.First select one of the record mode,then click the left key or drag to select the period. 【Copy to】copy the current channel settings to other channels.

  • Page 40: Alarm Function

    Picture 4.3 File Backup Query： ： ： ： Show the file information satisfying the set file attributes. Remove： ： ： ： Clear the file information. Begin： ： ： ： Click the play button to start the backup. 4.3 Alarm Function Alarm functions include: motion detect, video loss, alarm input .
  • Page 41 【CAM】Choose the set motion detect channel. 【Enable】 means that the motion detect function is on. 【Sensitivity】Choose in the six options according to the sensitivity. 【Region】Click setup and enter the set area. The area is divided into PAL22X18.. Yellow block means the dynamic detect defensive area. Black block means the unfenced area. You can set the area as followed, Drag the mouse and draw the area.

  • Page 42: Video Blind

    alarm is turned on. 【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds. 【Record channel】Choose the recording channel (multiple option supportive). Trigger the video signal when the alarm is turned on. Note:Set in the [recording setup] and perform the linkage recording.

  • Page 43: Video Loss

    Picture 4.9 Video Blind Set method: refer to chapter 4.3.1. Motion detect 4.3.3 Video Loss When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is turned on. Picture 4.10 Video loss Set method: refer to chapter 4.3.1.

  • Page 44: Alarm Input

    4.3.4 Alarm input When the equipment obtains the external alarm signal, the alarm function is turned on. Picture 4.11 Alarm input Set method: refer to chapter 4.3.1. Motion detect 4.3.5 Abnormal Analysing and inspecting current software and hardware of the device: When some abnormal events happen,the device will make a relative answer such as show message and buzzer.

  • Page 45: System Setup

    4.4 System setup Set the system parameters such as General, Encode, NetWork, NetService, GUI display, PTZ config, Add IPC， ， ， ， Tour， ， ， ， System time， ， ， ， Video standard， ， ， ， Resolution， ， ， ， Wireless， ， ， ， Color setting， ， ， ， PTZ control.

  • Page 46: Encode Setup

    【Video Standard】PAL or NTSC. 【Auto Logout】Set the latency time in 0-60. 0 means no latency time. 【Key Voice】Enable the speaker on front panel. 【Auto add ipc】NVR will automatically search and add ipc. 【Channel Privilege】When checked，there will not be preview images before logining 4.4.2 Encode setup Set the video/audio code parameter: video file, remote monitoring and so on.

  • Page 47: Network Setup

    【Video/Audio】When the icons are all selected, the video file is video and audio multiplex stream. Sync encode set NVR will sync the encode parameters with IPC. 4.4.3 Network setup Picture4.17 Network 【Net Card】You can choose cable network card or wireless network card. 【DHCP Enable】Obtain IP address automatically(not suggested) Note：...

  • Page 48: Netservice

    【P2P】Enable or disable p2p function. 4.4.4 NetService Choose the network service option and click the set button to configure the parameters. Picture 4.18 NetService 【PPPoE setup】 Picture4.19 PPPOE Input the user name and password that ISP（Internet service provider）provides. After saving it reboot up your system.
  • Page 49 Picture 4.20 NTP The NTP server must be installed in the PC. Server IP:Input the IP address installed NTP server. Port:Default: 123. You can set the port according to NTP server. Time zone:London GMT+0 Berlin GMT +1 Cairo GMT +2 Moscow GMT +3 New Delhi GMT Bangkok GMT +7 Hongkong Beijing GMT +8 Tokyo GMT +9 Sydney GMT +10 Hawaii...
  • Page 50 User Name:Apply the email server user name. Password:Input the password corresponding to the user. Sender:Set the email sender address. Receiver:Send the email to appointed receivers when the alarm is turned on. You can set three receivers at most. Snapshot:Enable or disable alarm snapshot. 【DDNS】...
  • Page 51 【Enable】Click Enable,then all settings will be available 【Server IP】 IP address for FTP server 【Port】 Domain Port of FTP,default 21 【User Name】User name of FTP 【Password】Password of user 【UPNP】UPNP protocol can auto port forwarding on router,make sure UPNP is running on router before use it.
  • Page 52 【Wireless Config】ADSL through usb 3G net card Picture 4.25 Wireless Config 【Enable】Choose Enable to make all settings available 【Type】Dial type,default AUTO 【Wireless AP】3G access point 【Dial Number】3G Dial Number 【User Name】User name of 3G 【Password】Password of dial user 【IP Address】IP address,got from dial 【Wifi】wireless connection through usb wifi net card Page 52...

  • Page 53: Gui Display

    4.4.5 GUI Display Configure the video output parameters including the front output mode and code output mode. Front output：In the local preview mode include: channel title, time display, channel title, record status, alarm status,bitrate info, transparency and region cover. Code output：In the network surveillance and video file mode include: channel title, time display, channel title, record status, alarm status,bitrate info, transparency and region cover.

  • Page 54: Ptz Setup

    Picture 4.28 GUI Display 【Channel Title】Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters and 25 letters are supportive. 【Time Display】 means the selective state. Display the system data and time in the surveillance window.

  • Page 55: Add Ipc

    【Channel】Choose the dome camera input channel. 【Protocol】Choose the corresponding dome protocol. (PELCOD as an example) 【Address】Set as the corresponding dome address. Default: 1.（Note：The address must be consistent with the dome address.） 【Baudrate】 Choose the corresponding dome baud rate length. You can control the PTZ and vidicion. Default: 2400.

  • Page 56: System Time

    4.4.9 System Time Link to “General” to set system time.Refer to 4.4.1General 4.4.10 Video standard Link to “General” to set video standard.Refer to 4.4.1General. 4.4.11 Resolution Link to “General” to set display resolution.Refer to 4.4.1General. 4.4.12 Wireless ADSL through usb 3G net card.Refer to 4.4.4net service--wireless. 4.4.13 Color setting Refer to 3.5.4Color setting.

  • Page 57: Account

    Picture4.32 HDD Manage 4.5.2 Account Manage the user purview. Picture 4.33 Account 【Modify User】Modify the existed user attribute. 【Modify Password】Modify the user password. You can set 1-6 bit password. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid. Note：...

  • Page 58: Online User

    Picture 4.34 Modify Password 【Add user】Add a user in the team and set the user purview. Enter the menu interface and input the user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time. Once choose the team the user purview is the subclass of the team.

  • Page 59: Tv Adjust

    Picture 4.38 Online User 4.5.4 TV adjust Refer to chapter 3.5.5 . 4.5.5 Auto Maintain The user can set the auto reboot time . Picture 4.39 Auto maintain 4.5.6 Restore The system restore to the default setup. Page 59...

  • Page 60: Upgrade

    Picture 4.40 Restore 4.5.7 Upgrade Upgrade Picture 4.41 Upgrade】 】 】 】 choose USB interface. 【 【 【 【 【 Upgrade file】 】 】 】 choose the file which needs upgraded. 4.5.8 Device Info Provide device interface info like audio in,alarm in/out to be conveniently used for user. Picture 4.42 Device Info.

  • Page 61: Info

    4.6 Info 4.6.1 LOG Look up system log according to the set mode. Log information include: system operation, configuration operation, data management, alarm affair, recording operation, user management, file management and so on. Set the time section to look up and click the look up button.

  • Page 62: Entertainment

    4.7 Entertainment Click “Game” . Built-in “Tetris”. 4.8 Shut down system Refer to chapter 3.5.6. Page 62...

  • Page 63: Faq And Maintenance

    5 FAQ and maintenance 5.1 FAQ If the problems are not listed, please contact the local service or call the HQ service. We are willing to offer the service. 1、 、 、 、 The NVR can not boot up normally. Possible reasons are as followed: The power supply is not correct.
  • Page 64 Possible reasons are as followed: The program is not matched. Please update the program. The image brightness is all 0. Please restore the default setup. There is no video input signal or the signal is too weak. The channel protection or the screen protection is set. The hardware of the NVR is damaged.
  • Page 65 The according channel is not connected with the video. 9、 、 、 、 The time is wrong. Possible reasons are as followed: Setting is wrong.. The battery is in bad connection or the voltage is too low. The oscillation is damaged. 10、...
  • Page 66 Network connection failure. Network setting issues. Invalid password or user name. The CMS is not matched the NVR program version. 13、 、 、 、 The image is not clear or there is no image in network preview state or video file playback state.
  • Page 67 When multiple transformers are connected, the power supply is not large enough. Please give each transformer individual power supply. The distance is too far. 17、 、 、 、 Alarm can not be recessional. Possible reasons are as followed: The setting of the alarm is not correct. The alarm output is turned on manually.

  • Page 68: Maintenance

    There is no DivX503Bundle.exe file to play AVI video files. The DivX503Bundle.exe and ffdshow-2004 1012 .exe files must be installed in the windows xp system. 22、 I can not remember the advanced code or network code in the local menu operation. Please contact the local service or call the HQ service.

  • Page 69: Appendix 1.Remote Controller Operation

    Appendix 1.Remote controller operation （1） （2） （3） （4） (7） （8） （5） （6） Serial number Name Function Multi-window button Same function as Multi-window button in the front panel Numeric button Code input/number input/channel switch 【Esc】 Same function as【Esc】button in the front panel Direction button Same function as direction button in the front panel Input the number of NVR to control it...

  • Page 70: Appendix 2.Mouse Operation

    Appendix 2.Mouse operation *Take right hand as an example The mouse in USB connection is supported. Operation Function Double click the playback video to zoom in or out the screen Double left click Double click the channel to make it full screen display double click again to goto next channel Left click Choose the according function in the menu...

  • Page 71: Appendix 3.Hard Disk Capability Calculation

    Appendix 3.Hard disk capability calculation Make sure the hard disk installed to the NVR for the first time. Pay attention to the IDE hard disk lines connection. 1、 Hard disk capability There is no limit for recording machine. We recommend 500G~1000G size to keep better stability.

  • Page 72: Appendix 4.Mobile Connection

    Appendix 4.Mobile Connection 1.Software download Android:Android devices can directly download the software “Super mEye”from google play .Or you can get it from the CD. Iphone:IOS devices can directly download the software “Super mEye”from app store. 2.Mobile connection Install the software on your mobile phone after setting remote surveillance. Name: Any characters you like.Please don’t use name that already existed in the device list.

Table of Contents