PSS User Manual Please read this entire manual. It contains instructions and important information about the operation of your PSS that will give you maximum benefit. CONTENTS Overview of Features Getting Started Charging the PSS Pairing the Ear Module with a...
PSS models) *WARNING: Use only the Sound ID specified wall adaptor for this product. This Sound ID wall adaptor enhances the system performance and increases the product safety features. p e r s o n a l s o u n d s y s t e m...
Page 4
PSS FEATURES Ear Module Front view Ear Loop In-Use & Status Light Volume Up & Sound Main Button: On/Off, Programs Toggle Button Call Answering, Call Waiting, Call Disconnect, Mute On/Off and Phone Pairing Volume Down & Voice Microphones Dialing Button...
With the mobile phone ON, follow the manufacturer’s instructions for pairing.When asked to look for devices, Select SOUND ID. The phone will seek Sound ID and ask to bond with the device. Select YES. You will be asked for a PASSCODE, PASSKEY or PIN CODE.
If you are unsuccessful in pairing the Ear Module after multiple attempts, for assistance please contact your mobile phone manufacturer or the company from whom you bought the PSS. THE PSS EAR MODULE Turning ON Press and hold down the main button until the status light turns green (approximately 4 seconds).
Inserting the Ear Module 1. Place the Ear Module in the RIGHT ear with the microphone pointing down. The PSS works only in the RIGHT ear. 2. Press the Ear Module into the ear while rotating backward until it fits snugly and comfortably.
Every time the button is pressed the volume will increase /decrease one step. The PSS will “remember” your volume setting for this mode. At the lowest volume setting, the Conversation Mode is deactivated, i.e., the Ear Module will not amplify...
NOTE: When the device is turned ON, it will automatically adjust to Program #1 USING PHONE MODE To use the Phone Mode, you must first pair the PSS Ear Module with a Bluetooth-enabled mobile phone (See “Bluetooth Pairing Instructions”). The Phone Mode allows hands-free wireless mobility.
Module will automatically switch to Phone Mode when the phone rings. TIP: Do not talk into your mobile phone microphone. The microphone in the PSS Ear Module will pick up your voice. Using Call Waiting You must have Call Waiting activated on your mobile phone to use this feature.
/ decrease one step. When you reach the maximum or minimum volume, you will hear a beep each time you press the button. The PSS will “remember” your volume setting for this mode. This volume setting can be different than the setting in Conversation Mode.
RECHARGEABLE BATTERY STATUS The PSS uses rechargeable batteries. If the battery is low, the status indicator will start to flash red. The Ear Module will also beep. Or, you can check status by pressing the main button.
® connectivity between your mobile phone and the PSS by utilizing a 2.4 GHz radio spectrum. It allows customers to use their mobile phone with the PSS hands-free – to receive, manage, and disconnect calls.
WARRANTY & AGREEMENTS Warranty For 3 months from date of purchase, Sound ID will repair or replace any device (Ear Module, Companion Mic, Charging Cradle, or power supply) that fails for reasons related to defects in materials or workmanship. The warranty does not cover any device failure caused by unauthorized repair, mishandling or modification.
Page 16
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 17
PSS. The information contained in Sound ID’s owner’s manuals is believed to be correct at the time of printing. Sound ID reserves the right to change or modify any information or specifications without notice. The contents of Sound ID’s user’s manuals are provided “as is”.
Need help?
Do you have a question about the PSS and is the answer not in the manual?
Questions and answers